Hydraulic cutting shear swing cut

KK Kletzer NC Tafelschere Schwingschnitt KK kletzer BS 3106

Condition: new, sheet length: 3120sheet thickness: 6,0total power requirements: 11weight approx.: 6500messurements (LxWxH): 3850x2750x1700 Nloded Eqrmepfx An Ijd

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: Nlsdpfx Ajyh Hwusn Isd - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Nedpfx Anjgu N Alj Isld Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Nedpsychqzefx An Isld Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm Nlsdpfxjpxmxco An Isd - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: new, Year of construction: 2022, messurements (LxWxH): 3660 x 1340 x 2500number of axes: 3pressure: 120 Tonnenweight approx.: 7000 kgoil filling: 200 Litermotor power: 11 Press Brake Control Unit : Esa S 630 Cnc 10 2d Graphical Screen - Touchscreen Control Unit Panel : Swivel Pendant Arm Hydraulic Press Brake Valve Option : With Ce Safety Signals Press Brake Safety Plc : Mcs Plc Safety Plc Press Brake Laser Safety System : Dsp-Ap Safety Block Laser Manual Height Adjustment) Press Brake Back Gauge : X Axis, 500 Mm Range, Including 2 Fingers, Manually Adjustable In Height And In Lateralposition. Press Brake Finger For Back Gauge : Standard Xf Arka Ve Yan Muhafazalar : Var (Ce'Li Model) Press Brake Top Tool Clamping : Manual European Type L:150 Mm (Promecam) Nlsdpfohut Aaox An Ijd Press Brake Top Tool : Eurostamp 1260 / Standard (835 Mm And 805 Mm Sectioned To 595 Mm And 210 Mm ) Press Brake Bottom Die Holder : Mechanical European Type Standard Width (Promecam) Press Brake Crowning : Cnc Adjustable Motorized Crowning (V-Axis) Press Brake Bottom Die : Eurostamp 2067 / Standard (835 Mm And 805 Mm Sectioned To 100 Mm Lh, 395mm, 210 Mm And 100 Mm Rh) Press Brake Front Support : Xf Ön Destek Press Brake Front Support Number : 2 Pcs Support, Manually Adjustable In Height And Inlateralposition. Electrical System : 380 V-660 V, 50-60 Hz, 3 Ph ( I E 3 ) Electric Cabinet Cooling System : Air Ventilation With Fan Number Of Foot Pedal : One Label Group : Label Group English Packaging Method : Plastic Cover With Strech Flim Shipment Method : Standard

Condition: used, Year of construction: 2003, punching pressure 16 t plate thickness 8 mm plate length max. 1250 mm sheet width - max. 1000 mm engine output 13 kW Nedpfx Ansd Ih Spe Iold control Cadman CNC voltage 400 V weight of the machine ca. 8,3 t dimensions of the machine ca. 3600 x 2300 x 2000 m

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left Nledpfx Aexz Hh Usn Iod ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM Njdpoym Rl Nsfx An Ield total 30 kw - total kg ca. 1900

Condition: new, sheet length: 3100sheet thickness: 6,0total power requirements: 11weight approx.: 7000messurements (LxWxH): 4110x2195x1770 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  Nlsdod Eqrnjpfx An Isd We have many references!