Wheel loader

Kingway Radlader FARMER 809T Kubota Hoflader Tel

Condition: ready for operation (used), Year of construction: 2021, A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentation available. An on-site inspection is possible. Gjdezhw Skjpfx Aciekb

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Gkedpfx Ajy D Rk Iscijb Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: Gksdpfxjflz Ins Acijb *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2026, ‼️ FREE DELIVERY WITHIN GERMANY ‼️ ‼️ ROAD REGISTRATION* ‼️ Josan – the EVERYMAN’S LOADER Robust, reliable, and affordable – without unnecessary frills. You can also order the wheel loader with a width of 1.30 m! ⚙️ OUR COMPONENTS: ✅ FREE delivery throughout Germany to your location! We have our own trucks and a logistics company. ✅ Road registration* from TÜV SÜD – available only from us! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cabin FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This allows for smooth and sensitive raising and lowering of the pallet forks. Feel free to test it on our premises! We recommend testing it on other Chinese wheel loaders as well. ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in an oven. This is how our frame, tanks, boom, etc. are treated. This provides extreme rust protection, included at no extra cost! ✅ NEW! Larger luxury cabin for more legroom. With reinforced steel, we meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT, adjustable to your weight. ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg including the bucket. ✅ Hydraulic Euro attachment (standardized EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by qualified technicians in our own workshop ✅ We stock all spare parts in Gemmrigheim. Therefore, we can send parts within 24 hours ✅ We have our own factory in China! Check out our website for pictures and videos! ✅ Through ongoing quality controls during the production process, we have achieved very high quality. ✅ Thanks to our expertise and good mechanics, we can also provide prompt and unbureaucratic assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Own weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg Gedpfx Aozf H Sbocijkb ➡️ Dimensions (L x W x H): approx. 4500 x 1600 x 2550 mm ➡️ Tipping height approx. 2.83 m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engines ➡️ Articulated steering with swing axle ➡️ Rear view camera ➡️ Luxury comfort cabin with air-suspended comfort seat & retractable seat belt ➡️ Enlarged step ➡️ Cab can be heated and windshield can be heated via ventilation ➡️ Electric joystick for moving forward and backward with thumb on the joystick ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ All-round visibility ➡️ Floating function ➡️ Hydraulic oil cooler ➡️ Additional control lever so that the bucket/fork tipping speed can be adjusted ➡️ Crawl speed and fast speed can be engaged automatically ➡️ 2-stage converter transmission, electrically controlled ➡️ UVV NEW 1 year ➡️ Tires as in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ Bucket approx. 0.6m³ (not standard bucket with 0.38 m³) Optional: ➡️ Road registration ➡️ Kubota engine ➡️ Pallet fork with attachment and 120cm tines combined with two bale spears with 90cm ➡️ Euro attachment with hydraulic locking bolts ➡️ Stainless steel exhaust ✨ NEW! LIMITED EDITIONS ✨ Individual pieces: Natogrün & Pink Lady available and ready for delivery now! Net 12,499.00 € + 19% VAT 2,374.81 € Gross 14,873.81 € Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty conditions. Image/text and equipment may vary. Errors and omi

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: Gksdpfxeyk Sl So Acijb €3,300 net €3,927 gross

Condition: ready for operation (used), functionality: limited functionality, power: 74 kW (100.61 HP), fuel type: diesel, empty load weight: 6,450 kg, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2004, Equipment: additional headlights, all wheel drive, cabin, standard shovel, trailer coupling, Telescopic Loader MANITOU MLT 630 Turbo Year of manufacture: 2004 Operating hours are unknown as the counter is non-functional! 101 HP Perkins engine 4-speed powershift transmission 3-ton lifting capacity 6-meter lifting height - NEW BUCKET - mechanical quick coupler - auxiliary hydraulic circuit up to the fork carriage - all-wheel drive Gsdpfx Asyf Abyeciekb - 3 steering modes - joystick control - cab with heating - lighting system with indicators - ready for immediate use! - original paint! - good tires! - incl. CE certification - incl. Belgium road registration Sale price: €23,500 net, incl. new bucket as shown in the photos! Pallet forks or light material bucket available at additional cost! Affordable delivery possible!

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 Gkedpfx Aow Ufpljcijb PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, pressure 100 t Godpeyv N Ngofx Aciokb stroke 400 mm 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Year of construction: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Gsdpfow Ufixox Aciskb Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Gksdpfjh Dqb Dsx Acieb Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery