Bed Type Milling Machine - Universal

KIHEUNG U1250

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges Itedpfsxcgtgox Aa Ejr - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece Isdpsuq A T Sefx Aa Estr - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Isdpfsguk S Sox Aa Estr Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Condition: used, Technical characteristics: LENGTH: 3,600 mms Ijdo Dvllspfx Aa Estr

Condition: used, Year of construction: 2001, Control SIEMENS table surface area 160 mm weight of the machine ca. 10 t Iodpfxsudc S Te Aa Eotr

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 Ijdjgabu Uepfx Aa Estr with counterholder and base plate.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press Iedpfx Ajv Sva Eoa Eetr for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,400 h, functionality: fully functional, machine/vehicle number: 8662, turning length: 380 mm, turning diameter: 400 mm, spindle bore: 55 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 100 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 380 mm, spindle motor power: 11 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 3,500 mm, total width: 1,650 mm, type of input current: three-phase, overall weight: 3,300 kg, bar passage: 45 mm, spindle nose: ASA 5", coolant pump power: 75 W, tailstock quill diameter: 85 mm, number of tool stations in tool turret 1: 12, Equipment: documentation/manual, Biglia B301 CNC Lathe – Used & Refurbished in Excellent Condition Year 2005, used and refurbished, ideal for precision machining of small to medium-sized components. This machine is robust, reliable, and compact, equipped with a bi-directional 12-position turret, automatic tailstock, and hinged belt-type chip conveyor. Perfect for machine shops and companies seeking a high-quality, ready-to-use CNC lathe. Main technical specifications: - Model: Biglia B301 - Year: 2005 Capacity: Isdpfovw Agvsx Aa Eotr - Max swing diameter: 400 mm - Max bar working diameter: 45 mm - Max secondary operation diameter: 220 mm - Max machining length: 380 mm Spindle: - Spindle nose: ASA 5” - Spindle bore: 55 mm - Chuck: 3-jaw Autoblok 210 BH - Spindle speed: 100 – 5000 rpm - Spindle motor power: 11 – 15 kW Travel: - X axis travel: 160 mm - Z axis travel: 380 mm - B axis travel: 440 mm Feed rates: - X/Z axis rapid traverse: 20 m/min - B axis rapid traverse: 12 m/min Turret and tailstock: - Turret: bi-directional, 12 stations - Automatic tailstock: yes - Quill diameter: 85 mm - Taper: MT4 Weight and dimensions: - Machine weight: 3,300 kg - Dimensions: 3,500 × 1,650 × 1,900 mm (h) Included accessories: - Hinged belt-type chip conveyor - 12 static tool holders - Parts catcher (pick-off arm) Condition and availability: - Used machine, tested and in perfect operating condition - Ready for delivery - Machine can be inspected by appointment at our facility - Available for movement testing by appointment at our site Ideal for: precision machining, batch production, and applications on steel, aluminum, brass, and technical materials.

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Itjdped E A I Iefx Aa Esr Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Year of construction: 2017, sheet width 2070 mm Isdpfswc D Dxjx Aa Eetr plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark