Chain, continuous - broaching machine,

Karl Klink RKW 25-3800-520

Condition: used, Year of construction: 1990, machine/vehicle number: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / technical data: Chain broaching machine for continuous outside broaching tractive force: 25.000kg cutting speed: 7,2 / 8,1 / 9,6m/min maximum tool length: 3520mm passage width: 520mm clamping area of the tool carrier: 3520 x 460 mm dimension: 12.300 x 6.400 x 4650mm power supply: 380V 50Hz / 110kW Accessories/ special equipment: - 6 tool carriers for tool change - machine documentation Remark / General The machines are in a good condition. The machines are dismantled and stored in our warehouse. The total volume of the plant is several trucks (approx. 70to per machine). Nsdpoinim Tsfx Aa Ejwr The machines have produced connecting rods for passenger car diesel engines. Chain broaching machines are designed for mass production. The continuous (backstroke-free) working process in chain broaching is designed for maximum achievable productivity in external broaching. The chain broaching process is the only broaching process without a backstroke of the tools or workpieces. In chain broaching, the workpiece is continuously moved past the tool and thus performs the feed movement. and thus carries out the feed motion. This unique broaching process is only used for very large quantities in series production.

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers Nwjdjwc D Dxspfx Aa Esr - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark

Condition: excellent (used), Year of construction: 2002, quill stroke: 35 mm, grinding spindle speed: 1,670 rpm, overall weight: 4,000 kg, Used cylindrical grinding machine STUDER S40 : - 350 mm permissible diameter - Distance between centers 1000mm - Table travel 1050mm - Standard grinding wheel dimensions: 400x40x12mm Nedpfx Ajmuz Sqoa Ejwr Technical specifications : - Distance between points: 1000mm - Tip height: 175mm - Strokes: 1050 x 275mm - External grinding wheel dimensions: 400 x 40 x 127mm - Grinding head power: 7.5kW - Speed: 1,670 to 2,110 rpm - Workpiece-holder headstock taper: ISO 50 - Headstock power: 0.785kW - Max. workpiece weight between centers: 130Kg - Tailstock: Morse 3 type - Quill travel: 35mm - Weight: 4000Kg

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm Njdel Ha Twspfx Aa Eowr power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Nsdoh T Ulyjpfx Aa Eowr Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... On Your request I will send detailed photos of all parts. Nwedpjddxv Uofx Aa Eer

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg Njdehvml Ispfx Aa Eewr

Year of construction: 1979, condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Nedpfx Aaehq Uigj Ejwr Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm Njdev Hcwtepfx Aa Eewr wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Nwodpfx Aovnd Susa Esr