Electric 4-wheel

Kalmar ECF80-6

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for the production of corrugated cardboard boxes, capable of manufacturing a variety of box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic setup via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the capability to produce over 100 different box styles. The machine offers high flexibility, allowing for rapid changeovers between different sizes and styles. Technical Specifications - Maximum speed: up to 100 m/min - Widths: from 100 mm to 2590 mm (102 inches) Hodpfx Ajxpga Tsfnonh - Length: Unlimited - Box types: Over 100 different styles, including 0201, wraps, pallet boxes, and partitions - Control: Fully automatic setup via touchscreen - Energy efficiency: Up to 75% energy savings compared to conventional machines - Material: Suitable for all types of corrugated board

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work Hnjdpfx Aorz Nflofnsh carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface Hsdpfx Afjvr Eh Esnsnh • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), Year of construction: 2003, Cyklop XZE-311 strapping press Year of construction: 2003 Passage width: max. 2200 mm Passage height: max. 2200 mm Hedpfx Aotqpadefnsnh Belt guiding distance: 625 / 440 Roll pitch: 60 mm Strapping speed: 2.9 m/s Strap tensioning force of the strapping unit: adjustable up to 2000 N Pressing force: adjustable from 5 to 48 kN

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: Hnedpjvtckmefx Afnsh The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW Hnsdjqn A Rnopfx Afneh

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Chip conveyor Automation / Robot Hnodev Rr Hxepfx Afnsh

Year of construction: 2024, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! Hodpfx Aeqvmpfjfnjnh With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel Hnedsw E Nnnspfx Afneh NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: good (used), machine/vehicle number: 2964, Year of construction: 2012, load capacity: 45,000 kg, lifting height: 15,100 mm, mast type: telescopic, total length: 11,100 mm, total width: 4,160 mm, operation weight: 70,500 kg, additional equipment features: Warning triangle, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRF450-60S5 from Uniktruck Hnjdpsul Dn Tofx Afnjh