Demagnetizer

JUNG

Condition: used, Width x Depth: 450 x 175 mm Height (approx.): 120 mm Pitch: 10 mm Prsdpfs Aggcysx Akisc

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 375 mm, grinding wheel diameter: 300 mm, grinding wheel width: 50 mm, Equipment: documentation/manual, Very well-maintained ELB surface grinding machine with automatic feed Type: Optimal 6375 ND Year of manufacture: 1988 Grinding area: 600 x 375 x 375 Grinding wheel: 300 x 50 x 76.2 mm Pedpfjzxn H Hjx Akisrc Accessories: Magnetic chuck with adjustable holding force (600 x 350 mm), paper band filter system, operating manual.

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Table width 150 mm Grinding length 400 mm Grinding width 150 mm Design: hydraulic Max. distance from table to spindle center line 350 mm Table speeds: continuously variable from 0.00 m/min up to 0.0 m/min Automatic vertical feed: from 0.000 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Psdsvga Suopfx Akisrc Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor 0.30 HP Machine weight approximately 900 kg Overall dimensions of the machine: Length 1300 mm Width 1000 mm Height 1500 mm

Condition: used, Year of construction: 1961, Technical details: grinding length: 600 mm grinding width: 200 mm workpiece height: 270 mm grinding length: mit Magnet: 500 mm Distance Spindlecenter - clamping surface area, min:: 350 mm grinding spindle speed: 1000...4700 U/min table surface area: 720 x 200 mm table load capacity: 60 kp magnetic plate size: 455 x 180 (Gleichstrom) mm magnetic-table: vertical kippen 90° längs Stück total power requirement: 2,0 (2,7 PS) kW weight of the machine ca.: 1600 + 176 kg Gleichrichter kg dimension machine xH: 1,4 x 1,8 x 1,7 m transport measurements machine: 1,4 x 1,8 x 1,6 m dimensions electric cabinet: L: 850 x B: 450 x H: 1.100 mm dimensions of grinding wheel: Ø 225 x 20 x Bohrung Ø 51 mm mm Prodpfsu Ngg Uex Akiec The magnetic plate (24V) is cooled. Grinding spindle: The grinding wheel infeed is electric, vertical 270mm, infeed z-axis 0,002 mm to unlimited inching infeed 0,001 - 0,010mm Peripheral speed max 35 m/sec. allowed equipped with coolant tank, pump and magnetic separator, as well as grinding wheel - size Ø 152 x 14mm plus various accessories (in the cabinet) like some grinding wheels and balancing flange The machine is pre-equipped for an exhaust system. *

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Psdpfsxrf Nrex Akiorc

Condition: good (used), Year of construction: 1981, functionality: fully functional, overall weight: 2,200 kg, Machine in good condition. Magnetic clamping plate, 600x200. 1 flange. Predpfx Akj Afp R Doiec Can be tested while powered on.

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Pedpfx Akjyh Amloisrc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm Pedpfszvy T Tjx Akierc -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: used, total height: 1,700 mm, total length: 2,300 mm, total width: 1,500 mm, Empty weight: 2.000 kg - Serial number: OF50-158 - Drive system: Conventional - Power [kW]: 2.6 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 400 - Table width [mm]: 720 - Table depth [mm]: 200 Podewningspfx Akierc - Magnet width [mm]: 400 - Magnet depth [mm]: 140 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Options: Digital readout - └ Type of digital readout: VisoData - Control: Conventional - Motor power: 2.0kW - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel Prjdpfxoy Naw Ie Akijc About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Prsdpfoyw Svfjx Akisc

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel Prodpfez Agz Rsx Akisc About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 1996, JUNG JF 600 Surface Grinding Machine Jung JF 600 Year of manufacture 1996 Overhauled in 2018 Excellent CONDITION The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 1993 / 2018 Table length: 600 mm Table width: 250 mm Axis movement: Longitudinal travel (X-axis): 600 mm Cross travel (Z-axis): 280 mm Maximum distance between table and spindle center: 500 mm Grinding length: 600 mm Table speed: Continuously adjustable from: 1 m/min to: 24 m/min Creep feed: from: 0.03 m/min to: 0.40 m/min Automatic cross feed: Continuously adjustable from: 0.010 mm/min to: 10000 mm/min Connection: 50 Hz 3x 380 Volt Grinding spindle motor: 9.5 kW Total power requirement: 13 kVA Machine weight approx.: 2500 kg Machine dimensions: Length: 2910 mm Width: 2320 mm Height: 1840 mm Additional equipment: Coolant system About the machine: Podpfx Aeyxdaljkisrc For sale is a Jung JF 600 surface grinding machine. This universal surface grinder is in very good original condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. A grinding travel of 600 mm on the longitudinal axis and a cross travel of 300 mm make this machine ideal for toolmaking, jig and fixture construction, and small batch production. This model series is characterized by extensive standard equipment and ease of use. The robust spindle head design and the double V guideways in both the longitudinal and cross axes guarantee long-term precision. The intuitive controls make operation easy and significantly increase productivity. The guideways are regularly lubricated via central lubrication. The Jung has been mechanically and electrically checked by us. Take advantage of the opportunity to view and test the Jung on site under power. Further surface grinders from well-known manufacturers can be found on our website.

Year of construction: 2026, condition: new, All components are ground to the highest precision. Thanks to the innovative design, angle adjustment is achieved without any change in parallelism or flatness. Adjustment is easy and secure using the angle scale. The magnetic clamping plate is based on neodymium and is liquid-tight. Stable construction despite low weight. Manufacturer: Grindtec Pedpfx Akeyx Izmjiorc Model: GS.450 Year of manufacture: 2026 Condition: new Category ID: 1168 Machine type: Precision sine table GS.450

Condition: excellent (used), I offer a professional sine magnetic table from the renowned German company K. JUNG GmbH Göppingen. This device is designed for the precise clamping of parts during grinding, measurement, and tooling operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sine magnetic table (tilting) • Magnetic workpiece clamping • Adjustable tilt angle with angular scale • High precision • Robust cast iron construction • Original wooden transport case Pjdpfxsz Sm Hxj Akijrc Included in the set: • Magnetic table • Original wooden case • Documentation and setting table • Clamping elements as shown in the photos • Operating keys Condition: • Used item • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as shown in the photos Ideal for: • Tool grinders • Surface grinders • Tool rooms • Precision workshops • Production and maintenance The item sold is exactly the one shown in the photos.