Band saw

JAESPA Compact 2.8

Condition: good (used), Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm Giedefc T Tqjpfx Ai Neu -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: new, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 1,500 rpm, turning diameter over cross slide: 1,000 mm, total length: 2,510 mm, total height: 3,546 mm, total width: 4,155 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning height: 825 mm, mount diameter: 1,000 mm, workpiece diameter (max.): 1,100 mm, overall weight: 16,000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X axis travel: 500+40 mm - Z axis travel: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Giodjyxg N Aepfx Ai Nsu Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X / Z: 20 / 20 m/min - X axis ballscrew: diameter 50 x 8 mm - Z axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37-45 kW - Motorized tool motor: 7 kW - X and Z axis servomotors: 4-7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - Fanuc 0i-TF Plus numerical control (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB ports - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for motorized tools - Chip conveyor - High-pressure pump 15 BAR - 3-color alarm and cycle-end lamp - Integrated work light - Leveling feet - Tool box with service keys - Air blow system through the spindle - Upgraded turret motorized tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Dual pressure release - Renishaw M.T.P. manual presetting - Oil skimmer - Static toolholder kit - Fume extractor predisposition - Black color NEW MACHINE IN STOCK FOR IMMEDIATE DELIVERY

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) Gijdpott Ecdefx Ai Neu 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Giodpfx Aiewwucue Nju Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Gedsvxlq Hepfx Ai Njiu Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Gsdpewzwu Ijfx Ai Nsiu Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors Gedsv Si Szepfx Ai Neiu 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Installed Power: 7,4 kW Noise Level: 63 dB Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Giodpfxjv D Hayo Ai Nou Machine Weight: 457 kg.

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Giodpfjv Hygfex Ai Nsu

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure gauge: up to 250 bar -Individual components: pressure accumulator/hydraulic tank/filter/valves (see pictures) -Number: 2 units available Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg Gjdogz Irvepfx Ai Nsiu