Bench drilling machine

IXION BT 13

Condition: good (used), Year of construction: 2003, Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST Godpfxsk Tuwvs Aaxobl -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Condition: used, sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Gbedpfx Asxp H Dxjaxsl Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, bore capacity in steel (diameter) 13 mm throat 180 mm bore stroke 70 mm morse taper 3 MK table: 215 x 215 mm Godpowpltusfx Aaxobl turning speeds 240 - 4000 U/min engine output 0,7 kW column diameter 65 mm dimensions 650 x 250 x 800 mm weight 50 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 00119451, Offer 24320 Technical Data: - Drilling capacity - in steel 13 mm - - in aluminum 15 mm - Drill spindle mount MK 1 - Drilling depth 70 mm - Distance spindle / column 180 mm - 5 drill spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - height-adjustable drill table with T-slots 250 x 220 mm - Distance drill spindle / table approx. 270 mm Gbsdpfx Aoxfa U Aoaxsl - machined baseplate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with - Quick-release drill chuck 1 - 13 mm

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 Gedpfjby Stpox Aaxsbl - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Gbedpfxsharwvo Aaxsl Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm saw band length / mm table height / mm Gbjdpfsxbh Hfsx Aaxel

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Gedpfsgyy I Asx Aaxebl Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm Gbsdpfsx Hp Iksx Aaxol

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Gsdewftcvspfx Aaxebl