Flatbed truck with tarp

Iveco SWAY 510 CENTINATO 7,40 AUT RETARDER

Condition: good (used), machine/vehicle number: 67, mileage: 311,489 km, first registration: 01/2019, fuel type: diesel, axle configuration: 6x4, fuel: diesel, emission class: euro6, Year of construction: 2019, Brand: M.A.N. Model: TGS 26.460 6x4 Year of manufacture: 2019 Euro 6 Mileage: 311,489 km Lsdpsyuiu Sefx Akloag Automatic transmission ID no. 67

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Ledot N Antopfx Akljag Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: used, mileage: 887,065 km, power: 353 kW (479.95 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 6x4, brakes: engine braking, emission class: euro4, suspension: steel-air, Year of construction: 2008, MAN TGA 33,480 year 2008, km 887065, EURO4, hydraulic system, manual transmission, air suspension Lodpfoqd Ripjx Akljag

Condition: new, mileage: 1 km, power: 390 kW (530.25 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 2026, Technical Information Number of cylinders: 6 Engine displacement: 12,900 cc Transmission Transmission: ZF TraXon, 12 gears, automatic Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Tire size: 315/70R22.5; Max. axle load: 13000 kg; Tire tread depth left: 100%; Tire tread depth right: 100% Condition Overall condition: very good Technical condition: very good Optical condition: very good Damage: none Ljdpfx Ajy R Rwuekleag Warranty Warranty: None

Condition: used, functionality: fully functional, mileage: 273,549 km, first registration: 06/2021, fuel type: diesel, empty load weight: 10,700 kg, maximum load weight: 15,300 kg, overall weight: 26,000 kg, tire condition: 80 %, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 11,930 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 8,000 kg, loading space length: 9,600 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, navigation system, parking heater, retarder, seat heater, IVECO S-WAY 260SY48 Flatbed with sliding tarpaulin and side rails (internal dimensions: 9.60m long / 2.50m wide) 6x2 front axle with leaf springs - rear axle with air suspension differential lock automatic transmission Ljdpfxjzwnn Io Aklsag ZF Intarder 3rd axle with adjustable height and steering tires with 80% tread remaining wheelbase 6.00m total truck length 11.93m GVW 26,000kg - payload 15,300kg 600L tank Euro 6 air-suspended driver's seat sun visor fog lights central locking air conditioning auxiliary heater refrigerator navigation system electric windows and exterior mirrors sleeper cab with 1 bed radio ABS all information subject to change without notice, errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE Lodpoyzim Asfx Akloag -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: used, In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Lasdpfozna S Hex Aklsg On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 3 kg, first registration: 06/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID – DRIVER’S SIDE OPENING, PASSENGER SIDE HINGES, REAR OPENING WITH TWO SWING DOORS, NEW FLOOR FITTED REF: 25-U-89 TYPE: Bulky waste NEW: No LID: Yes OPENING: Rear with two swing doors DIMENSIONS Laedswuwvropfx Akleg TOTAL OUTSIDE LENGTH: 5.00 m BOX OUTSIDE WIDTH: 2.50 m FRONT PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m REAR PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m SIDE PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m CAPACITY: 25 m³ WEIGHT: 2,840 kg FLOOR: 4 mm WALL: 3 mm COLOR: green Errors and omissions excepted. Prices shown are excluding VAT. Please contact sales for an up-to-date price and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste sector. Specialized in trucks, trailers, and roll-off equipment. Over 50 trucks and more than 150 containers, roll-off bins with and without cranes, available for immediate delivery. E.&O.E. Given the number of listings and details provided Aurora recommends checking the accuracy of the information with our sales staff.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 476 h, overall weight: 11,860 kg, power: 407 kW (553.37 HP), Engine: Deutz TCD 12.0 L6, 407 kW Year of manufacture: 2024 Serial number: 21060084 Location: NRW Total operating hours: 476 h Engine operating hours (new): 91 h Rotor operating hours: 207 h Availability: by arrangement Equipment: 2 horizontal infeed rollers 2 vertical infeed rollers Infeed size: 1000 x 625 mm Max. log diameter: Ø 620 mm Number of knives: 3 pcs. Counter blade: 1 pc. Capacity: up to 150 m³/h Weight: 11,860 kg Radio remote control Spiral fan HD infeed chain Baskets: 50, 70, 100 mm The machine is in excellent, like-new condition and can be inspected during chipping operations by arrangement! Warranty: The machine is sold in the condition it is in at the time of delivery. The seller assumes no liability for defects. Lodpjzcn Igsfx Akljag We reserve the right to make interim sales, changes and repairs. This overview serves only as a source of information and does not constitute a binding offer.

Condition: used, STOW storage frames - used - great condition. We have a large number of storage racks from various companies such as MECALUX, STOW, MAGO, BITO, SHAFER,WDX,JUNGHEINRICH,SLP, DEXION,PROMAG etc... with a high load capacity, available, undamaged... The offer concerns the STOW racking frame with height of 805cm - used Commodity code : MTP007165 Height : 805cm Depth : 110cm Post type : PNFB 15 Includes cross and diagonal bracing, Laodpfev Uzvkex Aklog Includes post feet. Poles are assembled Bolted truss Net price : € 109.00 with complete frame. We also have large quantities of used crossbeams in very good condition. * I have large quantities available. * For larger quantities, price negotiations possible. * Transport throughout Europe possible. Location: Chmielów/Tarnobrzeg, Poland