Mobile Klimaanlge ohne Abluftschlauch

IKG 6,7 KW / 4,5 KW

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Bwodpfxefzrgye Ap Iow

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Bwjdpfofyadbex Ap Isw The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) Bedpfsvlgzaox Ap Ieww several positioners are available

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle Bsdpfx Apodqzhbe Ieww TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm Bedox Ac Rbjpfx Ap Ioww ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter

Year of construction: 2018, condition: ready for operation (used), Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, refilling, and other processes. The systems can presumably be adapted to any mixing ratio – exclusively for polyurethane. Documentation available. An on-site inspection is possible. Bwodpfx Aew Hgltep Iow

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Bsdpfxspwgr Hs Ap Ieww Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: good (used), Electric cart mover Power Attack MTC 30 CC Device in very good condition. Ideal for transporting heavy goods, machines, boats, etc. After inspection, brand new batteries 2 pcs, new tires, charger, hook, fastening element with transport rollers included. Manufacturer’s description: Thanks to our compact electric towing tractors, you can efficiently transport heavy loads weighing up to 25 tons. These efficient transport devices are characterized primarily by the fact that they are emission-free, quiet, compact and efficient. Therefore, they are particularly suitable for internal use in warehouses and production halls. Bwjdswunl Dspfx Ap Iow Product features: Pulling force 30 t Length: 1650 mm / double telescopic Roller width: 380 mm Weight: 70 kg

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power Bwodpfod Tw T Nsx Ap Iew consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface • Easy servicing of the drain pan We have 6 pc on Stock!

Condition: new, Cluster tool for Trumpf punch Bjdpeiq Dmxefx Ap Ijww