Machining center

HYUNDAI-KIA HS630

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Podeh T Ulyspfx Ag Dogw

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Psded E A I Ispfx Ag Dogw Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Landonio TMU 1200 Lathe Pgedpfx Asizxvkjg Dew

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 800 – 12000 MX injection molding machine Year of production - 2006 Closing system: - Mold closing force: kN 8000 - Mold opening force: kN 560 - Dimensions of the mounting plate (h x v): mm 1600 x 1530 - Clearance between columns (h x v): mm 1120 x 1000 - Mold opening path: mm 1600 - Mold installation height (min - max): mm 500-1100 - Plate opening stroke: mm 2100 - Ejector stroke: mm 300 - Ejector force: kN 200/100 Injection system: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Injection volume: cm3 8588 - Injection weight for PS: g 6098 - Number of screw revolutions, standard/option: rpm 121/153 - Injection efficiency (standard) Electric-hydraulic equipment - Nominal power of the pump motor: kW 110 - Installed power of heaters: kW 57 - Number of cylinder heating zones: - 7 Pgjdpfx Agstmq Akj Dsw - Number of dry cycles according to Euromap: 1/h 965 - Oil tank capacity: l 1500 Dimensions and weight - Net weight with control cabinet: t 45 - Machine dimensions (length x width x height): m 10.81 x 2.92 x 2.51

Condition: good (used), FANUC 18iMB Control Working travels 1020 x 610 x 600 mm Tool changer with 48 Positions Spindle speeds 15'000 rpm Spindle taper BT40 Cooling through spindle Laser tool control system 3D measuring taper Psdpetwp H Hofx Ag Djgw Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h Pgjdpfx Asir Id Usg Djw

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Pjdpfx Agog D Rfme Dogw

Year of construction: 2010, condition: excellent (used), - Production per hour : 4 panels - Daily production on 8 hours shift : 32 -Year production on 250 days: 7040 -Efficiency: 1MWp/year -Required Power: 40kW - Electric Feeding : V 380/3 + N +T 50 Hz -Water Consumption : 210 litres / our (0 litres with refrigeration) -Air consumption: 7000 liters / hour Final Product A) Standard 36 square cells 103 x 103 mm (4”) Panel with typical dimensions: 990 x 450 mm Power per cell: 1,5 Wp Cells per panel: 36 Year Production per shift : 380.160 Wp Panels per year: 7040 B) Standard 72 square cells 103 x 103 mm (4”) Panel with typical dimensions : 1300 x 660 mm Power per cell : 1,4 Wp Cells per panel : 72 Year Production per shift : 760.320 Wp Panels per year: 7040 C) Standard 36 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1200 x 540 mm Power per cell : 2,5 Wp Cells per panel : 36 Year Production per shift : 633.600 Wp Panels per year : 7040 D) Standard 72 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1600 x 800 mm Power per cell : 2,5 Wp Cells per panel: 72 Year Production per shift : 1.267.200 Wp Panels per year: 7040 E) Standard 36 square cells 156 x 156 mm (6”) Panel with typical dimensions : 1450 x 650 mm Power per cell : 3,5 Wp Cells per panel : 36 Stran 4 od 7 Year Production per shift : 887.040 Wp Panels per year : 7040 F) Standard 72 square cells 156 x 156 mm (6”) Panels with typical dimensions : 1950 x 980 mm Power per cell : 3,5 Wp Cells per panel : 72 Year Production per shift : 1.774.080 Wp Pgsdpsuhwmgofx Ag Dsw

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1x polishing machines for robot processing sold. Execution 1 x left Manufacturer: SHL polishing wheels DM - 1000 mm Pgedped S R Agefx Ag Dow drive power 7,5 kW Infeed suction flap

Condition: used, functionality: fully functional, Used Schenck Balancing Machine HU 9 T with used CAB 690 H measuring unit. The machine comes with original foundation drawings, documentation and manuals. Pjdpfx Aew Aaugjg Dsgw The machine can be test run in Kerava. Technical data: - Maximum rotor weight with roller bearings: 50 000 kg - Maximum weight for symmetrical rotor: 56 000 kg - Load capacity per bearing pedestal: 28 000 kg - Load capacity per T-slot pedestal: 28 000 kg - Minimum rotor weight: 2 500 kg (1000 kg) - Maximum diameter over machine base: 4 000 mm - Machine bed length: 15 000 mm - Adjustable roller bearing diameters: 125–270 mm , 450–900 mm - ABB electrical drive FC: 90 kW - 4-speed gearbox: approx.120–1400 rpm - Pneumatic locking for end drive - Electrically operated movable pedestals - Accuracy: Umar 0,5gmm /kg 270 rpm 1000 gmm