HORIZONTAL PRESS

HYDR. 80t

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm Dedpfx Aaep E Eglo Ijwc barrel length: 150 mm backup rolls: backup block/chain

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Dwsdpfx Aowbf U Nea Ioc

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Dedpfx Aasv Rmmms Iswc

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Dwsdpoydpxvjfx Aa Ioc Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Dedpfx Aoyg I Nfja Ijwc Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Dwsdpfxevmz Ido Aa Iec Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Djdoua Tbwjpfx Aa Ijwc Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Dedpfxefcw Apj Aa Iewc Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: used, BROACHING MACHINE Dwsdet Hr Dfjpfx Aa Iec

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm Dwedpfx Aolp Uz Roa Ioc stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m