Vertical machining center

HURCO VM10U

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Condition: Used, very good, still in production Operating hours: 26,290 h Fpedpeymc Ngjfx Aa Eok Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Fpedpezbh U Defx Aa Eok Taper Size BT 40

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5 Fsdpfoywllyex Aa Eopk

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a measuring system from Keyence, type XM- C1000 The measuring system is something special, as the points to be measured are scanned by hand Very user-friendly and intuitive system. Compact and easy to maintain Control unit and PC XM-1600 are included in the offer Also Measuring probe, exchangeable probes, alignment station, various clamping devices Clamping vice Mouse Touch probe Operating instructions Fpjdpfx Aorq Ebioa Eek On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available Fpodpfx Ajyuzg Hja Eok

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm Fpsdpfx Aeyhcfkja Eek • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: good (used), Year of construction: 2009, Machine will come with robot . 42.000 rpm Fpjdpfx Ajxfu S Nsa Eok

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Fpedpfewtmg Dsx Aa Esk Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, This 3-axis HAAS VF-2SSYT with Pallet Pool 3+1 was manufactured in 2022. It features a 30 hp, 22.4 kW in-line spindle, capable of 12,000 rpm, and a 50+1 tool changer. It includes a 15" screen and a 3+1 pallet pool with 900x450 mm pallets. If you are looking to get high-quality milling capabilities, consider the HAAS VF-2SSYT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Tool changer: 50+1 tool changer Fpsdpjx Hblujfx Aa Eek • Extra coolant: 360 liters • Pallet pool: 3+1 pallet pool with 900x450 pallets • 21 bar trough spindle • 15" screen Extra Information Machine still under power

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Fedpfxoxrcnlo Aa Eepk