CPU HC020 SPS-II 16MHz 128K

HOMAG

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Blodeyqybuopfx Agzsd Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Bodpfjyqx U Hjx Agzsld Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: used, machine/vehicle number: 006376, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Blodpfxoyqxype Agzsd Panel return for edgebander: Left

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Blsdpsypm Hhefx Agzjd Year: 2020 Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification Bsdpsypm Dgsfx Agzsld 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Bedpeypm Avefx Agzjld Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: ready for operation (used), Year of construction: 1998, Homag Processing Center Genius BAZ20/30/14/D Electronically controlled milling and edge-banding machine, post-processing, and drilling center designed for batch production of furniture parts, solid wood, or similar materials. Base Machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Aggregate carrier with linear guide system, ball screw, and digital AC servo motor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the attachment of various table configurations Control System: Wood Wop 5.0 - Enlarged Z-axis travel, 500 mm - Extended safety step mat - Manual through-feed table B20/30+40/…/D - Motorized width adjustment of the longitudinal console D-table - Chip conveyor belt for B../30+40/K - Stop pins for laminate overhang - Main spindle, 12 kW - Chain tool changer, 70 positions for B20, for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface 220/24 volt - Edge gluing aggregate, 4 sides for main spindle - Melting unit with granulate container - External automatic triple edge changer - Rack changer system for aggregates and tools - Rabbet pressure zone for main spindle - Flush trimming unit for tool changer - Saw and crosscut unit for tool changer - Boring/milling unit with 4 spindles for tool changer - Lock case milling unit for rotary magazine - Vertical milling unit with tracing ring - Sanding unit with air blast nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Bedex Nrk Hepfx Agzsld Location: Ex works, customer site - Immediately available - Machine must be dismantled by the buyer.

Condition: used, Year of construction: 2018, max. workpiece length 4200 mm profile spindle 1 Stück main drive 15 kW HOMAG CNC Machining Center BMG310/42/F/K, Year of Manufacture 2018 ----- This machine is part of the sale of a complete window manufacturing business, see stock number 1305-6979. Machines still connected and ready for demonstration Technical specifications: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth Bledpfxoyn R Ias Agzjd - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lift rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows For a detailed description, please see the attached PDF document! ----- Price: on request! Options with additional costs: ----- - Used Leitz tools for Homag with curved tooling, compatible with SCM Windor 40 R systems #1305-6993. Price: 12.000 Euro - Barbaric vacuum lifter, manufactured in 2015. Price: 4.500 Euro - used Löwer MZP 1 mini fingerjointing press for arched windows Price: 1.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Bodpfex A Hczox Agzsld Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: used, Year of construction: 2000, The HOMAG BOF 31/40/G is an industrial CNC machining center designed for precise sizing, drilling, and milling of panel components in furniture manufacturing. BOF series machines are robust production centers suitable for both series and flexible manufacturing of furniture parts. Bjdpfx Ageynb N Uozsld This model is conceived as a universal production cell with options for automation and integration into HOMAG production lines.