Center lathe

Holzmann ED1500KDIG_400V

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm Kledpfx Aeg Trvromrsu table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty Kljdpfx Amsx Ada Rorou The machine conforms technically to the state of the art at the year of manufacture.

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V Kodpfjykb Hfjx Amrelu total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp Kedow Rlvqspfx Amrelu - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: Ksdpfjv Rgzwox Amrolu 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: good (used), centerless grinding machine Klodpfx Aetrguvjmrou

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Kodpfx Asmw Ukcjmrolu Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm Kedpfx Asyf Ehismrjlu - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm Kljdpfx Amju Sblwerju total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm Klsdju Idhyepfx Amrou current- max.: 400 V / 50 Hz A total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *