ITNC-640 / additional magazine / ICS (internal coolant supply) / laser

HERMLE C 250

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Blum Laser Hodpfsxqd S Nsx Ag Ujfb Internal coolant 40 bar with paperbelt filter Air true Spindle

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. Hfodsdyah Sspfx Ag Usb High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Hfedpfjxn Svdjx Ag Ujb Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MAZAK QT COMPACT 200MYL 500 U Year of manufacture: 2019 MAZATROL SmoothC Max. turning diameter: 340 mm Max. turning length: 535 mm Max. spindle speed: 5,000 rpm C-axis: 0.0001° Spindle: A2-6 Spindle bore: 65 mm Tool turret 12 tool stations 12 powered tool stations Milling spindle power: 5.5 kW Max. milling speed: 4,500 rpm Travel distances: X-axis: 215 mm Z-axis: 605 mm Y-axis: 100 mm Tailstock: 565 mm Rapid traverse X/Y/Z: 30/10/30 m/min Measuring probe Bar feeder interface NC tailstock 3-jaw chuck Kitagawa BB208, diameter 210 mm Hfjdpexzd Sqofx Ag Usb Toolholder package: 8 fixed + 4 driven toolholders (2/2) Swarf conveyor – ConSep

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Hfjdpfxexd Tike Ag Ueb Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Hsdpfxehq Dbxe Ag Ujfb Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Specification: Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Hfjdowx Nl Hspfx Ag Ueb Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: used, Year of construction: 2011, travel -x axis 570 / 500 (1.070) mm travel -y axis 650 mm travel -z axis 530 mm control HEIDENHAIN iTNC 530 number of spindle speeds 12.000 U/min tool taper SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, ITC (50bar), zero-point clamping system and chip conveyor. The machine only has 7.863h spindle hours. An extensive tool package is included. The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Hfodpfx Agowlvrao Ueb #Tags: RS605 K IC 40 | RS-605 | RS 605

Condition: good (used), Year of construction: 2014, DMG MORI DMU 75 monoBLOCK Year of manufacture: 2014 Control system Siemens SINUMERIK 840D sl ShopMill Hfedpfx Agjx N H Rzj Usb Working area / Axes Traverse paths X / Y / Z: 750 / 650 / 560 mm 5-axis simultaneous machining NC swivel rotary table Table / Workpiece Table size: Ø 650 mm Max. table load: 600 kg Max. workpiece dimensions: Ø 840 mm, height 500 mm Spindle Tool holder: SK40 Max. speed: 18,000 rpm Through-spindle coolant (IKZ): 40 bar Feeds / Dynamics Rapid traverse X/Y/Z: 40 m/min Feed rate: up to 40,000 mm/min Acceleration: 6 m/s² Tool changer Chain magazine: 60 tool positions Max. tool weight: 8 kg Max. tool length: 315 mm Max. tool diameter: Ø 80 mm (adjacent positions occupied) Ø 160 mm (adjacent positions free) Tool change time (chip-to-chip): approx. 4.9 s Chip removal Chip conveyor The machine is supplied with a newly packaged window/disc.

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Hfsdpexx Tcmofx Ag Ueb Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.