Horizontal machining center

HELLER MCi 16

Condition: good (used), Year of construction: 2007, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, torque: 145 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, table width: 500 mm, table length: 400 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 80, Brand: Heller Type: MCi 16.1 Year of manufacture: 2007 Control: Siemens 840D Psdpfxevzz Tis Ag Djgw Travel x-y-z: 630 mm B-Axis: 360000 x 0.001° Rapid traverse rate in X-, Y-, Z-axis: 90000 mm/min Table dimensions: 500 x 400 mm Accelaration: 12 m/s² Spindle speed: 16000 rpm Spindle power: 38kW Torque: 145 Nm Magazin places: 80

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, The machine is in good technical condition, currently disconnected. Heidenhain TNC 530i control system, chip conveyor, tool magazine 40 pcs. Pgjdpfjv Upbnjx Ag Dsw

Condition: good (used), Year of construction: 2004, Technical details shown in pdf document. Pedpfx Agsruq N Io Dsgw

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min Pgjdjriulgjpfx Ag Dew rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Pgsdpfx Aet Hagnsg Dsw Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous Pedpewa R A Njfx Ag Djgw HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: - X: 800 mm - Y: 800 mm - Z: 800 mm Pedpfov Tvivox Ag Dogw Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Pgedpfxeu Ix Izo Ag Dsw Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2010, x-travel 730 mm y-travel 730 mm z-travel 730 mm control Matrix Nexus Mazatrol Pgjdpfx Ageup H Dro Djw Main spindle: turning speed range - main spindle 35 - 18.000 min/-1 power capacity - milling spindle 35 / 26 kW tool taper ISO 40 DIN 69871A transmission ratio 2 pallet changer: numbers of pallets 6 (5+1) size of pallet 500 x 500 mm max. workpiece weight 700 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec B-axis (table) 0,001 ° Tool-Presetter: number of toolpositions 160 pos. tool taper ISO 40 DIN 69871A max. tool diameter 95 mm max. tool-dia with free toolbox 150 mm max. tool length 420 mm max. tool weight 12 kg change-time tool to tool 2,7 / 3,2 sec feeds: rapid traverse 60 m/min feed speeds max. 60.000 mm/min total power requirement 78,5 kVA weight of the machine ca. 16,4 t dimensions of the machine ca. 7,5 x 3,5 x 3,0 m CNC - MachiningCenter Horizontal MAZAK - Nexus 5000 II - palletchanger 6(5+1) pos. - WITHOUT tools

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Pgjdpfxswz I Aco Ag Djw Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.