Horizontal lathes Harrison ALPHA 400 PLUS 1998

Harrison ALPHA 400 PLUS

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm Hfedpfeh Hvk Aex Ag Usb face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: good (used), Year of construction: 1999, Machine has 12,300 operating hours Gildemeister NEF 320 / cycle lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Hfodsw Rm Tdopfx Ag Ueb Multifix toolholder, Tailstock, 2 steadies, Accessories,

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Hfsdsua E Txopfx Ag Ujb

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Hedpfx Asxn Apbeg Uefb Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset Hfjdpsw S E R Rofx Ag Ujb • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg

Condition: excellent (used), Year of construction: 2006, turning diameter 330 mm turning length 750 mm control WEILER D3 dia. of quill 50 mm quill stroke 130 mm taper in tailstock-quill MK-3 spindle turning speed range 1-4500 U/min taper in main spindle MK-5 weight of the machine ca. 1400 kg dimensions of the machine ca. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very good condition and can be viewed by arrangement with the seller. - Lever quick-release chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle - Live steady with sliding jaws, passage 10-85 mm - Three-jaw chuck with wedge bar system, diameter 160 mm, bore 42 mm, with mounting according to DIN 55027 /5, with 1 set of basic jaws and hard Hfedpfsx Szpwsx Ag Ueb reversible attachment jaws - Lever quick-action chuck for pressure collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3-42 mm diameter, with mechanical and electrical locking, max. speed 4500 rpm. - 1 set of pressure collets DIN 6343-48 / 173E - Adjustable hollow spindle stop 38-48 mm for main spindle Translated with (free version)