CNC turning and milling center

HANEX 17D

Condition: excellent (used), New 2008 Kedpforfx Tnex Aa Eefa Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Year of construction: 2006, Hyundai Kia SKT 210SY lathe with Y-axis, C-axis, driven tools Fanuc 18iTB control with Manual Guide Max turning length 530mm Travel: X-axis 220mm Y-axis 80mm (+-40) Sauter 12-position tool turret for VDI40 Spindle bore 65mm, sub-spindle bore 33mm Tool probe Kfodpfx Aajwyv T Ho Eja Parts catcher Very good condition - Chip conveyor - Documentation - Tool holders

Condition: used, mileage: 385,120 km, power: 279 kW (379.33 HP), first registration: 04/2001, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, emission class: euro2, Equipment: crane, FM12 380 Manual transmission 12 speed Tipper with side walls Crane Palfinger PK13000A Low + high position operation 2 x hydraulically extendable With control for rotating head and grapple With rotating head included BLADE - BLADE sprung Belgian registration Good condition Kodpfsvw Hd Eox Aa Ejfa

Year of construction: 2004, condition: refurbished (used), Vertical unit venter VICTOR model Vcenter-55 : - CNC control : FANUC - Travels : - Longitudinal (X) : 550 mm - Cross (Y) : 460 mm - Vertical (Z) : 460 mm - Table : 800 x 460 mm - Maximum weight on the table : 300 kg - Spindle speeds : 8000 rpm Kodpfsmu Actox Aa Ejfa - Spindle power : 5,5 / 7,5 kW - Taper : BT 40 - Tools changer : 24 positions - Weight of the machine : 4 T

Condition: used, Year of construction: 2004, ECOCA SJ20MC 3 AXIS CNC TURNING CENTRE MAKE ECOCA, MADE IN TAIWAN MODEL SJ 20MC YEAR 2004 CONTROL FANUC 18-T MAX. TURNING DIA 170.0 mm MAX. TURNING LENGTH 300.0 mm Kfedpfx Aaetvav Ij Eea SWING OVER BED 380.0 mm OVER CROSS SLIDE 225 MAX. SPINDLE SPEED 4,500 RPM POWER TOOL SPEED 4000 SPINDLE NOSE A-5 / A2-6 DRAW TUBE DIA 45 RAPID TRAVERSE RATE X24 / Z24 PLUS VDI20 TOOLING PARTS CATCHER SWARF CONVEYOR POWER TAIL STOCK TURRET TOOLING

Condition: ready for operation (used), Year of construction: 1999, Takisawa EX-108 2 Axis CNC Turning Centre FANUC 21i-T Control Max’ Turning Ø 320mm X Axis Travel 180mm Spindle Bore 52mm 12 Station Block Turret 7.5kW Spindle Motor Spindle Range to 3500rpm Tool Setting Arm Collet Chuck Machine Multifeed ML1 Barfeed Separate Transformer Electronic Handwheel Swarf Conveyor Turret Tooling as photographed Year of Manufacture 1999 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78879 Machine Serial Number: NA Cost: £13,950.00 + VAT Kfodpfx Aajwnd Ius Eoa Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use

Year of construction: 2000, condition: used, Aufnahmen Divers K50 Diameter 50 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Kfedpfxsg T Ap Ao Aa Eoa +++++

Condition: excellent (used), Ecoca SJ-30HT, 3 Jaw Chuck, Tailstock, Toolarm, Year 2007 Control Fanuc 18-T Swing over bed 580 mm Swing over cross slide 434mm Max turning diameter 280mm Max turning length 460mm (centers) Chuck size 254mm (10") Bar passage (bore) 90mm or 75mm (SJ 30G) Spindle 3500–4200RPM; 25–30Hp / 11–15kW Spindle nose A2 8 Spindle bore 90mm (through hole) X-axis travel 190mm Z-axis travel 520mm Rapid traverse X/Z 15m/min (X), 20m/min (Z) Tool turret 12 station hydraulic Curvic coupling Quill (tailstock) 90mm dia, taper MT 5, 120mm travel Kedpfxowx Hnfo Aa Esfa Spindle motor power 25/30Hp (18–22kW) Electrical power 40kVA supply Coolant tank147L Footprint 4460×1920mm Net weight 5000kg

Condition: ready for operation (used), Year of construction: 1988, operating hours: 36,452 h, Boley BDN 160 ZB including LNS Hydrobar bar feeder manuals various tools Kfodpfxjwwbatj Aa Esa

Condition: excellent (used), Dugard Mini Mill CNC Vertical Machining Centre Fanuc Oi, 4th Axis, 2011 Year: 2011 Model: MN965005 Control System: Fanuc Oi-MB X-Axis Travel: 450 mm Y-Axis Travel: 350 mm Ksdpfx Aaoxpnlqs Eofa Z-Axis Travel: 380 mm Table Size: 700 × 320 mm Max Table Load: 150 kg Spindle Speed: 80–8,000 RPM Spindle Taper: BT‑40 Spindle Motor: Fanuc Version: 5.5 kW Siemens Version: 8.5 kW (specify if applicable) Toolchanger: 12-position Automatic Tool Changer 4th Axis: Included Rapid Feed Rate: 36 m/min Working Feedrate: Up to 10,000 mm/min