Lifting table with turning station

Haneu HT 1012/So

Condition: good (used), functionality: fully functional, Max. pressing length approx. 2,750 mm Max. gluing width approx. 1,750 mm 10 freely movable support arms, each with a hydraulic press cylinder and one grid-adjustable counter bearing Press cylinders can be freely positioned on the support arms Support arms suspended from above, allowing for quick relocation from one side to the other Dimensions of press cylinder block: 115 x 50 mm Dimensions of counter bearing: 115 x 50 mm Itsdpfxoww Awgj Aa Eor Max. cylinder stroke approx. 30 mm Gluing rack movable on rollers Installation dimensions (LxWxH): 3.1 x 1.0 x 2.25 m Press cylinders have been pressure-tested in stock.

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Iedpsv Dah Defx Aa Ejtr Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Isdpfjk E Hmtjx Aa Ejtr Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm Iodpfoihahmox Aa Ejtr scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand Itsdpfjtwz Tlsx Aa Ejr

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Itodou R Sx Eepfx Aa Esr Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, Work and Assembly Table Ijdokwhwzjpfx Aa Ejtr New Machine Year of Manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,020 mm, construction height: 410 mm, lifting height: 600 mm, empty load weight: 150 kg, load capacity: 350 kg, total length: 1,900 mm, total width: 740 mm, warranty duration: 24 months, LEVEL - Lift Table HS 350 Large without worktop Description: ᐳ Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for accommodating various worktops; 4 swivel castors, 2 with brake; Wheel diameter 125 mm; operated by foot pump Load capacity in kg: 350 Weight in kg: 150 Iodpfxoh A Hxis Aa Eetr Useable lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Condition: good (used), Year of construction: 2004, fuel type: electric, 4-way S-stacker Fabr.HUBTEX type: MQ120 Su BJ. 2004 Payload. 12 000 kg. Lifting height: 2700 mm Fork length: 1700 mm Itsdpodgp U Sofx Aa Ejr Hours of operation: 8990

Condition: used, Year of construction: 1996, Press area: 3000 mm x 2100 mm Pressing depth: Vertical pressing elements: 5 Pressure build-up: manual hydraulic Itsdpfowv Ncmjx Aa Ejr Pressing pressure: Cylinder stroke: approx. 100 mm Machine length: 3000 mm Machine width: 800 mm Machine height: 2500 mm Weight: 2000 kg