Press brake

Haemmerle

Condition: used, Year of construction: 1989, Technical details: pressure: 100 t chamfer lenght: 2600 mm Lodpfsu Icdmsx Abyjhn distance between columns: 2300 mm throat: 300 mm control for program: CNC-Steuerung DNC7000 dayligth: 830 mm max. stroke: 265 mm ajustment speed: 80 - 100 mm/sec back gauge: motorisch table-size: 2700 x 113 mm work height max.: 900 mm connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: 11,3 t machine dimensions LxWxH: ca. 3,2 x 3,8 x 3,0 m 3-point BENDING - mould bending -Hydrocushion (for regular force adjustment over the entire working length) -Backstop: width 2200mm, 2x supports travel 1800mm and 4x stop travel W:2550xL:860mm -Control panel on the boom can be swivelled and/or control stand with two-hand and foot control various press brake tools available i.D. *

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator Lsdpfodzqb Ejx Abyehn - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Ljdpoz Iuaiofx Abyjhn Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Lhodpfsz Eabyjx Abyen Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Please include information on the material, sheet thickness, and part size with your inquiry.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW Lhjdsxab Erspfx Abysn weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: used, functionality: fully functional, machine/vehicle number: 21'940, working width: 4,100 mm, stroke length: 400 mm, throat depth: 300 mm, overall weight: 23,000 kg, pressing force: 175 t, distance table to ram: 965 mm, TECHNICAL DETAILS Pressing force: 175 t Working width: 4,100 mm Maximum stroke: 400 mm Distance from table to ram: max. 965 mm Lhjdpfoz Dw S Hex Abysn MACHINE DETAILS Control model: Cybelec ModEva 12S (retrofitted) Hydraulic oil capacity: approx. 230 l Machine dimensions (L x W x H): approx. 5,400 x 2,420 x 3,200 mm EQUIPMENT Accessories as shown in the pictures.

Condition: used, The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible. Ledpfsz Da Nbox Abyohn

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm Lsdey Np Ajpfx Abyshn for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec oil volume 500 l dayligth 600 mm Lhsdpfx Abeyy A D Soyen Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2009 !! Machine is floor standing. Machine has 9 controled axes and a Laser controled crowning arrangement.

Year of construction: 2001, condition: ready for operation (used), A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible. Lhodpfozcyq Tox Abyjn

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch Lsdpfx Ajpxmxcsbyjhn - cutting line lighting

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Ljdslzizmjpfx Abyjhn

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Lhsdpfew A R Spjx Abysn

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Lsdpjwcqpnjfx Abyshn Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Year of construction: 1990, condition: used, machine/vehicle number: 22752; Lg-Nr. 12106, Technical specifications: - Pressing force 2000 kN - Max. working width 3100 mm - Distance between uprights 3200 mm - Upright overhang 300 mm - Max. installation height 965 mm - Stroke, or pressing depth, continuously adjustable 0 - 400 mm - Plunger speed, forward and return strokes, each 100 mm/sec - Working speed selectable in 9 stages, from 1 to 10 mm/sec - Drive 400 V / 26.5 kW - Space requirement approx. W 4400 x H 3500 x D 2200 mm - Weight approx. 18500 kg Lsdpfxebbwzne Abyshn - Including: - CNC control CYBELEC ModEva 15S, year of manufacture 2007 - Rear stop with 4 controlled pneumatic side stops and height-adjustable stop fingers - Controlled bending aids in the stop area - Hydraulic-pneumatic clamping of the upper and lower tools - Motorized crowning / hydraulic cushion in the table - Laterally movable support arms - E-stop foot pedal - Split top tool R 1-100 t/m, split die