Vertical machining center

Haas VF-5/40

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Podpfxjzcu Imo Adzsra

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Prodpjn Tnzfsfx Adzsa Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Condition: excellent (used), Year of construction: 2008, Haas VF-5D/40TRHE 5-Axis Machining Center Year of manufacture: 2007/11 X-axis travel: 1,270 mm Y-axis travel: 660 mm Z-axis travel: 635 mm A-axis swivel range: ±120° B-axis rotary range: 360° Diameter of the rotary table: Ø211 mm Max. load capacity of the rotary table: 90.7 kg Table dimensions: 1,321 × 584 mm Max. table load: 1,814 kg Spindle speed: 0–15,000 rpm Spindle motor: 20 HP / approx. 14.9 kW Spindle taper: CT #40 Tool changer: 24 positions APPROXIMATE MACHINE DIMENSIONS Length: 3,531 mm Width: 2,591 mm Height: 2,921 mm Machine weight: approx. 7,484 kg Prodpfxoztwdqj Adzja EQUIPMENT HAAS 5-axis control (drives and wiring) 2-axis swivel table (trunnion)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Auger chip conveyor Psdpfx Adoy D Enhszsra Spindle orientation X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Podpsvzxg Tefx Adzora Article number: 8143983 Serial number: 143983 The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Psdpfxeyf E D Ro Adzjra Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis Predpfxjlz Rvls Adzoa 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2014. It features a 12000 rpm spindle, a 40+1 tool changer, through-spindle coolant at 21 bar, and a conveyor. High-speed machining capabilities are enhanced with programmable coolant and Dynamic Work Offsets/Tool Center Point Control. It also includes Renishaw probes and a robot interface. If you are looking to get high-quality milling capabilities consider the HAAS UMC-750 machine we have for sale. Contact us for more information about this machine. • Tool changer: 40+1 tools (CT as provided) • Through‑spindle coolant (TSC) 21 bar • Air through spindle • High‑Speed Machining • Programmable coolant nozzle (P‑Cool) • DWO/TCPC • Auto Door Prodpfx Asx Imttodzea • Side window • Top roof/enclosed top Additional equipment • Chip conveyor • Renishaw probes (probing system) • Robot interface

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm Prodpfx Asd Iin Hedzja 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Prsdpfxex H Uz Nj Adzsa Application Types Other Machine Tools