HAAS VF-4

HAAS VF-4

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Hedpe Agn Dvofx Akijw Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, x-travel 1140 mm Hedpfx Asxx A Ewskiew y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: used, Year of construction: 2008, operating hours: 3,096 h, functionality: fully functional, machine/vehicle number: 1069140, overall weight: 4,500 kg, spindle motor power: 14,900 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, HAAS VF-4BHE Vertical CNC Machining Center – 2008 We offer for sale a used HAAS VF-4BHE vertical CNC machining center, manufactured in 2008. Since its purchase, the machine has been used by a single group of companies, operating on one shift and primarily employed for machining aluminum. The machining center is in full working order, has no history of accidents, and is maintained in good operational condition. Technical specifications and equipment: - Manufacturer: HAAS - Model: VF-4BHE - Year of manufacture: 2008 - Type: Vertical CNC machining center Hsdpo Afypkofx Akiow - Technical condition: fully operational - Servo drive operating time: 3,096 h - Motion time: 594 h - Spindle operating time: 656 h - Tool measurement: Renishaw tool sensor - Part probing: not available - Control software version: M16.10A Terms of sale: The seller does not provide machine loading services – the organization of loading and transportation is the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 14,700 h • Tool changes count: 67,000 • Voltage: 354–488 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 40 A Hjdpfx Akjz Dauwjijw

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1100 mm Travel distance Y :560 mm Travel distance Z: 510 mm Number of axis: 3 milling machine / machining center Control: HEIDENHAIN TNC 620 spindle chuck: SK 40 / ISO 40 spindle revolutions: 12000 rpm Speed range from: 20 U/min Speed range to: 12000 U/min table size X: 1400 mm table size Y: 560 mm max. workpiece weight: 1000 kg tool changer: 30 - time input Power : 13 kW Rapid traverse: 30 m/min spindle cooling chip conveyor control Heidenhain DMG MORI CMX 1100 V Year of manufacture: 2018 3-axis vertical machining center Hjdpjz A Apuofx Akiew HEIDENHAIN TNC 620 control 12 bar high-pressure coolant system 30-position tool magazine 30 ISO 40 tool holders included Chip conveyor Electronic handwheel Machine is currently under power Demonstration under power possible by appointment

Condition: used, Year of construction: 2015, functionality: fully functional, Počet os: 3 Hedpfj Ad Iabsx Akisw Pojezd osy X: 1270 mm Pojezd osy Y: 508 mm Pojezd osy Z: 635 mm Technická specifikace Výkon vřetena: 22.4 kW Rychlost vřetena: 12000 RPM

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli Hodpfxjz Nfirj Akijw - Coolant tank - Original documentation.

Condition: ready for operation (used), Year of construction: 2021, A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible. Hedjzlt Shspfx Akiew

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 29384, travel distance Y-axis: 600 mm, spindle speed (min.): 7,500 rpm, Equipment: chip conveyor, documentation/manual, Used by a toolmaking company (QPP Hungary Ltd.) on a single shift. The machine has been continuously maintained, is accurate and precise, and is still in daily use. It features a 30+1 tool SK40 tool magazine and an internal coolant supply. Hjdowhqhuspfx Akijw

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Hodpfxjz R Rf Ae Akisw Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 Hjdpfx Aksyalpcoisw • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 • Frequency: 50/60 Hz Hjdpfx Akez Dar Njijw • Full-load current: 35 A

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. Hsdpoz Ah S Dofx Akisw • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Hjdpfxoulwg No Akiow Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HAAS, This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Hedpfozxp D Hex Akijw