6m x 3m Butterfly Table

H&M X-Tilt

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hsdpfjxy Tmnjx Aagenl

Condition: excellent (used), Year of construction: 2018, The line consists of: - WEINMANN OPTIMAT WTZ 120/12 L assembly table - WEINMANN WMS 150 - WEINMANN OPTIMAT WTW 110/12 N/L loading/unloading table - Schmalz Jumbo Ergo 140 flexible hose vacuum lifter The WMS150 multifunction bridge is a CNC machine for the automated processing of timber structural elements (walls, roofs, and floors). Machine dimensions: - Length (X-axis): approx. 3,000 mm - Width (Y-axis): approx. 6,200 mm - Height (Z-axis): approx. 3,000 mm - Workpiece width: approx. 3,200 mm - Main spindle: 18.5 kW with automatic tool changer - FLEX5 indexing system Tool set for WMS tool changer consisting of: - 3-flute universal roughing cutter - Drilling unit - Saw unit - Marker with ballpoint pen technology HSK Hnodpfxjytyuae Aagjl - Saw unit NL 55 mm HSK63F - Saw unit NL 105 mm HSK63F Gluing system - Holder for PUR gluing unit - PUR one-component adhesive unit (1K) with 6 application nozzles Fastening and assembly unit - Automatic height adjustment for fastening device - Holder for ADUNOX screwdriving unit - ADUNOX-TRS screwdriving unit Bridge extension Tool holder beam with integrated Y-axis Sliding guide with U-profile for the bridge Increased X-axis drive dynamics Energy supply system via cable drag chain End position monitoring for handling systems Wheel and sliding block lock, right side of portal Homatic powerControl V2.0 control system Remote control for WMS150 with potentiometer Mobile extraction unit 3.0 kW Electrical cabinet cooling unit Less than 1,000 operating hours

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Hnedpol Txw Hofx Aagjl Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Hnsdpfx Aaow I U E Ajgjl Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment Hodjrbiv Aepfx Aagsnl - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Hedpfx Aex A Tc Ijagjnl Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Hnjdpfjx Nc Aysx Aagel Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Hsdpfxeyudids Aagenl

Condition: like new (used), functionality: fully functional, THCIKNESS PLANER model MARTIN T 44 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum working height mm. 250 maximum removal mm. 8 Hnedpsyml E Djfx Aagjl n.2 feed speed mt./min. 6 / 12 motorized table positioning with digital reading n.4 knives "Tersa" main motor power Hp 7,5 net weight kg. 1115 volt. 380/50

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Hodpfx Aowacqloagjnl Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr