Chiller

GWK weco 48.1 WZX

Condition: good (used), Year of construction: 2004, Peripheral devices Podpfxjh Hbpwj Akiegu Brand: Tool - Temp Type: TT - 157E Available: 14 pieces

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Pgsdpot Rmhaofx Akiju Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: ready for operation (used), Cooler Guntner Pgjdpfx Ashz T Igokiju Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Weight: 275 kg Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Pgsdpfxewx Hz Se Akiou Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120 Pjdpfxsud H Dmj Akiogu  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm Pgsdspdr Aiopfx Akisu

Condition: new, Year of construction: 2025, Efficient refrigeration systems with R290 – air-cooled, reliable, and environmentally friendly. Our models cover a power range from 20 to 800 kW and offer flexible options with or without free cooling. Advantages: Environmentally friendly refrigerant R290 with low global warming potential Air-cooled, internal pump, and tank Options: with free cooling, utilizing outside air for additional cooling, which reduces electricity consumption, especially during cooler months Scalability from 20 to 800 kW to suit your requirements State-of-the-art control system Customized consulting, planning, and dimensioning Delivery time depends on the model and equipment Psdefqllwspfx Akiegu Sustainable operation through low CO2 emissions and reduced operating costs We will gladly advise you on which version is best suited to your requirements.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Pedpfx Aksy Ewy Seiegu Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: used, Year of construction: 1966, planing lenght 525 mm table surface area 500 x 300 mm dimensions of machine L x W x H 1,98 x 1,06 x 1,42 m Pgsdpfjtumraox Akiou Accessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearing

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation Pjdpfxofnvvio Akiegu - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.