CNC Machining Centre GROB G350

GROB-WERKE G350

Condition: used, Year of construction: 2010, x-travel 600 mm y-travel 770 mm z-travel 675 mm Control Heidenhain iTNC 530 table surface area 400 x 400 mm spindle tunring speed 16.000 U/min Psdpjxq Hk Iofx Ag Dord tool taper HSK 63 number of tool places 40 Pos. spindle hours ca. 18.075 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - put into operation in 2012 - Internal cooling system - Renishaw 3D probe - Dual pallet changer - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Prodpfx Ast I Di Aog Djd Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3,796 h, functionality: fully functional, machine/vehicle number: S2909835010226, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 21,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 21.000 rpm - pallet change system for 2 pallets - High-pressure cutting fluid system (40 bar) _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Predpfx Ajxtknpog Djd Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced Energy efficiency package EEP1 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Pallet change system for 2 400 x 400 mm pallets Setup station door, automatic, for manual and automatic loading and unloading 2x Pallet 400 x 400 mm, T-slots, with pallet changer hook Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)  Cooling unit for hydraulic proportional valves Part clamping system in the setup station of the pallet changer KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1) Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR) Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm z-travel: 675 mm total power requirement: 47 kW weight of the machine ca.: 13 t Tool bore: HSK-A63 numbers of tools in magazin: 40 including additional tool magazine ZM 182 1 spindle , 5 axes Predjqy Sr Sspfx Ag Dod *

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: Psdpfsq U Sa Sex Ag Derd - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: new, Year of construction: 2025, machine/vehicle number: N2761135210252, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: ONE, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - 117 tools in the system - latest machine generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Work area door, automatic, for manual and automtic loading/ unloading Machine control Siemens ONE with GROB4Pilot GROB- NET4Industry starter package Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16.000 min-1, 159/206 Nm, 25/32 kW, oil- air lubrication Double disk-type tool magazine HSK-A 63 with a total of 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette 400 x 400 mm, grid holes, without pallet changer hook Pjdpexqlp Nofx Ag Dord Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (11 kW) Compressed air feed through spindle center Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z- Axis) Preparations for use of a machine accuracy package Remote machine diagnostics with access control switch 12-month warranty

Condition: like new (used), Year of construction: 2023, machine/vehicle number: U2456335210135, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - Highly dynamic rotary table - Latest Machine Generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, manually operated, for manual loading/ unloading Decentralized work area mist collector 800 m³ SIEMENS SINUMERIK 840D sl machine control with GROB⁴Pilot Podpfsuqiu Aex Ag Derd Swivel axis calibration GSC Advanced Time-controlled start of warm-up program - programmable at the HMI Tilting table, highly dynamic rotary table (A axis) Highly dynamic rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnosis GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 105 (45+60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette ø320 mm, T-slots arranged in a star shape Pallet equipped with 4 fluid connections Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Cooling unit for hydraulic proportional valves Additional control panel Platform at the tool magazine door Machine status lamp in the machine enclosure Preparations for use of radio signal receiver (RENISHAW) Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling Predpfx Agjw S N Ige Dsd

Condition: excellent (used), Year of construction: 2014, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Work area door, automatic Machine control HEIDENHAIN iTNC 530 Optimizing the machine kinematics with KinematicOpt Collision monitoring DCM Collision (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis), Customized coupling system TK57 Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM99 HSK-A 63 with 99 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT A‘=-180°(BLUM) Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Pedpfx Aoruqp Dsg Derd Changeable cutting fluid pressure increase Oil skimmer for cutting fluid care Air gun at the work area Flushing gun Rotary distributor in B'-axis rotary table Infrared touch probe m&h Remote machine diagnostics Warranty for Quality Checked Used Machine, 3 month

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: U220633501233, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 16,000 rpm, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - A/B Round- Axis re-placed - Manufacturer checked usedmachine ___ Basic machine G350 AB Generation 0 Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine control SIEMENS SINUMERIK 840D sl Standard interface 1.7 (GROB) Machine protection system CMS 100 (BRANKAMP/MARPOSS) Zyklus 996 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B’-axis, PW) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnostic GSD Single disk-type tool magazine HSK-A 63 with 34 tool pockets Additional tool magazine TM171 with 171 tools Tool cleaning device Tool coding system BIS-C (BALLUFF) Electromechanical tool breakage detection device Pallet change system for 2 400 x 400 mm pallets Setup station doo, automatic, for automatic load and unload systems Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (38 bar, ICS) Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flushing gun part clamping system in the work area  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1) Part clamping system in the setup station  KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1)  KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1)  KP6: Compressed air, manual pressure regulation, 0.5-5 bar (P1) Infrared touch probe m&h Prjdpfx Ajw Ev Rveg Ded Machine status light Remote machine diagnostics, without access control switch Warranty for Quality Checked Used Machine, 3 month

Condition: used, Year of construction: 2001, tip circle diameter 1000 mm root circle diameter 50 mm max. module 18 mm min. module 1 mm max. wheel diameter 1000 mm gear width 630 mm Profile height max. 41 mm helical angle (left/right) max. 45 ° table diameter 720 mm max. table load 1500 kg Predpswp S Thsfx Ag Djd grinding wheel diam. min/max. 180 / 400 mm grinding wheel width 60 (45/30) mm grinding spindle speed 0 - 3100 U/min total connected load 30 kVa

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: U268893501006, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 90, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highligts: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - 90 tools in system - ready for automation ___ Basic machine G350-1006 access-SERIE Travel path X-axis: 600 mm Travel path Y-axis: 770 mm Travel path Z-axis: 805 mm Power supply 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Work area door, automatic, for manual and automatic loading/unloading Decentralized mist collector unit for the work area Machine protection concept for emulsion machining Work area lighting Machine paintwork according to GROB standard Machine cooling system with air-cooled cooling unit (4.0 kW) Operating/environmental conditions according to GROB standard Electrical equipment according to EU GROB standard Stainless-steel internal work area enclosure Fluid cabinet doors HEIDENHAIN TNC 640 machine control Control interface (HMI) in the German language Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB Prjdpfx Agjw Eiw Ne Dsd Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW GROB spindle diagnosis GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Palette 400 x 400 mm, grid holes, without pallet changer hook Premium package -Scraper conveyor, discharge height 1,100 mm -Cutting fluid filter system -Cutting fluid tank -High-pressure cutting fluid system (5-40 bar, IKZ) -Cutting fluid low-pressure system Compressed air feed through spindle center Oil skimmer for cutting fluid care Flushing unit for the base of the work area Flush gun at the work area Flushing unit (Z-axis) Machine status light, 3-colored Preparations for use of radio and infrared signal receiver (RENISHAW) Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: new, Year of construction: 2025, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Prodpfx Agsqqi Dko Dod Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Prjdpfjriulgjx Ag Ded Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)