Milling spindle

GreCon

Condition: used, Year of construction: 2005, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press Dcedpfx Acswz H Anenok 1 CNC-controlled cross-cut saw 1 outfeed table

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Dodpfx Ajqpdkcecnock

Condition: used, Year of construction: 1995, preparation mat infeed mat Dsdpfszhrc Rox Acnsck recovery transfer GRECON Opticut 350 chainsaw

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Dcedpemig Tdsfx Acnsk Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: new, Year of construction: 2026, Genie GS2632 NEXT GENERATION E-Drive scissor lift, new, used, demonstration machines available Dodpfx Acsrhkqxsnjck

Condition: good (used), Year of construction: 1998, Optimizer GreCon Dimter OPTICUT 204 R - year of production 1998 - full optimization - cutting to a dash - width measurement - possibility of cutting aluminum TECHNICAL PARAMETERS: - max. cutting length 4,000 mm - min. element 200 mm - max. cutting height 100 mm - max. cutting width 260 mm - disc diameter 500 mm - engine power 9 kW - feed speed max. 160 m / min - acceleration 2 m / s2 - optimization in terms of length and value - pneumatic pressure of the material Dcjdsh Hfknopfx Acnek - three ejectors - dump tables - Rotary table - total length of 2000 cm Transport dimensions: - length 1300 cm - width 245 cm - height 220 cm - weight 3500 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar Djdpfx Acorf Ty Sjnsck air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Dedpfx Acou E Ezpsnock

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers - automatic transfer - continuous press feed - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm The system has been dismantled and is available for immediate delivery. Dedoh I Dufepfx Acneck The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.

Condition: used, Year of construction: 1990, Equipment: 1 FER-LDM 180 600 1000 milling unit, consisting of: 1 automatic electric carriage with a manually rotating table 1 saw 1 milling unit for notching 1 gluing unit 1 tapering and accelerating unit EKK 114.75 Djdszi Nbmspfx Acnjck 1 chainsaw + 5-meter hydraulic press BREMS

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 % Dcedpfx Acsr Iyvbsnjk

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Dcjdpfxewtgcxs Acnsk Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum material input length: 5000 mm Wood width min/max: 20-300 mm Wood thickness min/max: 10-100 mm Capability to cut bundles Defect cutting Dodpfx Aszaug Rocnsck CE certified

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Dodpfsx Dilhjx Acnsck

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Dcedpst Uduxjfx Acnsk