Carpentry machine

Graule ZS200 N

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor Isdpfxji Dfido Aa Ieth with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, power: 10.2 kW (13.87 HP), fuel type: diesel, fuel tank capacity: 15 l, color: red, overall weight: 1,500 kg, empty load weight: 1,450 kg, operation weight: 1,500 kg, lifting height: 2,740 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, adjustable chassis, cabin, parking heater, rubber tracks, OFFER!! €15,000 net!! Special offer: Only €15,000 net – including 3-year warranty, comprehensive spare parts supply, warranty & post-warranty service, and dedicated customer support. Ijdpfx Aov Av Idoa Ioth KINGWAY DEUTSCHLAND e. K. is the main dealer for the Kingway brand in Germany. We serve the entire German market and all neighboring countries, delivering machines to any destination worldwide. If you need a transport quote, have questions about our machines, or are interested in establishing a dealer network in your country, contact us! We offer a huge range of machines and sell over 3,000 units annually. If you are interested in additional models, please visit our website where you are sure to find the right machine for your needs. MINI EXCAVATOR YAMA S15K - KUBOTA TECHNICAL DATA: Machine weight: 1,500 kg Bucket volume (3 buckets included): 0.03 m³ Engine model: KUBOTA Engine power: 18.4 kW / 25 hp Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: Yes Maximum climbing ability: 35º Pump type: Gear pump Pressure: 16 MPa Hydraulic oil flow: 25 l/min Maximum speed: 2 km/h Platform rotation speed: 9-10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 L DIMENSIONS: Length: 2,550 mm Width: 1,100 mm Height: 2,310 mm Bucket width: 1,160 mm Bucket height: 210 mm Track width: 920 mm Track shoe width: 230 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Maximum digging height: 2,740 mm Maximum dumping height: 1,750 mm Maximum digging depth: 1,800 mm Maximum vertical digging depth: 1,320 mm Maximum digging radius: 2,400 mm Minimum swing radius: 1,550 mm Maximum dig radius at ground level: 3,227 mm Maximum height of raised dozer blade: 325 mm Maximum depth of lowered dozer blade: 175 mm PRICE: €13,500 net €16,065 gross - INCLUDES 3 digger buckets (200, 400, 800) - For machines regularly serviced by us, we EXTEND THE WARRANTY to TWO YEARS - 12 MONTHS FREE WARRANTY - after this period, all original spare parts available on demand! - FREE delivery within a 200 km radius - VAT-free sale possible (with valid VAT ID) - FINANCING available - We are always at your service! - We have our own mobile and stationary service teams, available for all our customers at any time.

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Itsdpek H Ic Usfx Aa Ieh Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp Ijdpfevzl Scex Aa Ieth - Serial number: 2024/95/5

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Itsdpfoucfwpjx Aa Ieh

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 2014/53/40, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 200 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, Equipment: documentation/manual, saw blade guard, GRAULE ZS 200 N For sale due to business closure – offered under special circumstances. Included with the saw are 2 roller conveyors, one 7000 mm long and one 4000 mm long, 1 laser-guided cutting line indicator, a chip extraction system, and a spare blade. For greater precision and accuracy, the tilt angles can be digitally adjusted via a control panel. Itjdpezaq Sijfx Aa Ioh The machine has been regularly maintained and adjusted by a specialized company.

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Iedpfxsy S Rrbe Aa Ieth Weight: 300 kg

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Isdpfx Aoi A Ix Hja Ieth

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Isdpfx Ajy S Rq Rea Isth Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Iodpfxevxr Ths Aa Ioth

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF Iodpfx Aaof Ddzqj Ijth 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Data: Itodpfsn R A Ewsx Aa Ieh Cutting height: 200 mm Cutting height at 45° incline: 140 mm Tiltable to the left up to 67° Tiltable to the right up to 45° 5 kW hydraulic feed brake (optional) Cutting length: 420 mm at 90° position Cutting length at 45° swivel: 295 mm Tilt angle: left 60°, right 30° Tilt adjustment from the front via hand crank. 1 wood saw blade, diameter 520 mm 1 heavy-duty cross-cut roller conveyor, length 6,000 mm, mounted on the left. The stop is adjusted from the front via handwheel. Length is digitally readable to the millimeter. The stop is pneumatically locked. 1 digital readout (230 V version) 1 heavy-duty feed roller conveyor, right side, length 4,000 mm Machine length: 11,700 mm Fully mobile Machine packed on wooden planks Images show a customer’s machine. Available upon request also with 215 mm or 240 mm cutting height.

Condition: new, Year of construction: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Iedpfx Aeiy Ry Aea Ieth Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. Itsdpfxedy Hm Ds Aa Ish 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: new, Year of construction: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Isdpfx Aaoiuld So Ioth Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg