Component

GMN TSE 110 - 6000 / 1.75 Hochgeschwindigkeitsspindel SN:R346576 - ! -

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Podjzhw Ryepfx Akiorc

Condition: used, Year of construction: 1985, thread dia. 254 mm Psdpot Hw U Aefx Akisrc grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete clamping system, with two modified clamps for Ø14 and Ø16 • Automated pallets with diameters of Ø3, Ø4, Ø6, Ø10, Ø12 • Various grinding wheels for roughing and finishing, some new, for both carbide and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) Pjdpfx Akszcvaksijrc • New workpiece rotation belt (replacement due in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter changes and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since the maintenance -separate sale can be considered- • Machine price: €25,000 - Filtration system price: €10,000

Year of construction: 2021, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 14,841h. With FMB Unirobot GP7-5Pkhs automation system, Jäger HF spindle grinding spindle, MicroCentric 4-410-3-QC chuck, MARPOSS measuring system with automated dimensional compensation, S400 oil mist filter, Knoll KF110/500 belt filter, 320 S1 hinged belt conveyor and other accessories. On-site inspection is possible. Pedpfev Uz Aqsx Akisrc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 13,572 h, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures Predpfxeyaz Ems Akisc • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)

Condition: used, Year of construction: 2015, operating hours: 56,000 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,500 h, spindle motor power: 22,500 W, spindle nose: HSK 63, number of slots in tool magazine: 24, tool length: 320 mm, Equipment: chip conveyor, Vertical Machining Center Manufacturer: CHIRON Model: MILL 1250 Year of manufacture: 2015 Control system: Siemens 840D Technical specifications: - X-axis: 1250 mm - Y-axis: 840 mm - Z-axis: 550 mm Prsdpfxey Tbtls Akiec - Speed range - main spindle: 12,000 rpm - Drive power - main spindle: 22.5 kW - Max. torque: 140 Nm - Number of tools: 24 - Max. tool length: 320 mm - Spindle taper: HSK 63 - Operating hours: 56,000 h - Spindle hours: 17,500 h - Machine weight (approx.): 9.7 t Equipment & Accessories: - Internal Coolant Supply (ICS) - Chip conveyor - Glass scales on all axes - Automatic door - Swivel axis with counter-bearing (Fibro) 4 identical machines are available. The machines were used for light countersinking and drilling operations. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2002, Machine type: CNC turning lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Prodpfjkyrwwjx Akioc Serial number: M02.43446 Year of manufacture: 2002 Available immediately Ex works, for self-disassembly Optional, we can offer disassembly and loading services.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical data will follow... Pedpfx Akoz Rka Ssiorc

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D Prodpfx Akjycg R Heijc Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17500 rpm Spindle clearance (distance): 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse rate (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical Power Supply Power supply: 400 V Total connected load: 70 kVA Weight and Dimensions Floor space requirements: 3900 x 3260 mm Machine height: 3100 mm Machine weight: 8800 kgs Accessories / Equipment Interface: Ethernet / RS232 / PCMCIA Coolant tank: 400 l With high-pressure pump: 70 bar With paper belt filter: KNOLL PF160/800 With coolant cooling system Internal Coolant Supply (ICS) Chip discharge: Rear Oil mist extractor: LOSMA Darwin 1200 Spindle cooler The machine is in good used condition. Available under power in Hungary.

Condition: ready for operation (used), Year of construction: 2003, Make: CHIRON Type of machine: MILL 800 Year of manufacture: 2003 Control system: Siemens SINUMERIK 840D Tool holder: SK 40 x-travel: 800 mm y-travel: 500 mm Pjdpfjzvyv Isx Akisrc z-travel: 550 mm Speed range: 12.000 U/min Table dimensions: 1.400 × 550 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 40 Bar