CNC Lathe

GILDEMEISTER CTX 500

Condition: used, Year of construction: 1998, operating hours: 40,519 h, functionality: fully functional, machine/vehicle number: 315546, turning length: 1,000 mm, turning diameter: 440 mm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,000 mm, type of input current: three-phase, bar passage: 72 mm, total height: 1,900 mm, total length: 5,560 mm, total width: 2,190 mm, overall weight: 7,500 kg, We are offering this used Gildemeister CTX-500 E CNC turning and milling center, year of manufacture 1998. Machine type: CTX-500 E Serial number: 315546 Year of manufacture: 1998 Well-maintained machine in original paint. Accessories: Chip conveyor Exhaust air filter Gedpfx Adsx Rhttemstt 3 driven tools Various tool holders Various jaws If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm Gtodpfxev Nxbys Admst - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Year of construction: 2009, 3-axis CNC lathe Brand: GILDEMEISTER Model: CTX ALPHA 500 Year: 2009 Max swing diameter: 240 mm Max workpiece length: 500 mm Max bar diameter: 67 mm Max X-axis travel: 210 mm Max Z-axis travel: 525 mm CNC control: CNC Pilot 4290 Included equipment: 3-jaw hydraulic chuck C-axis: 360,000 positions 12-position powered VDI 30 turret Chip conveyor Tailstock Set of VDI 30 toolholders Oil mist extraction system Gtsdpjx Ni D Dofx Admjt Complete documentation CE compliant Price ex works (excluding VAT): on request* *Machine availability subject to prior sale. Technical details provided for information only, to be verified by the customer upon order.

Condition: excellent (used), For sale: CNC LATHE GILDEMEISTER CTX 500 V3 with live tooling. TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 500 V3 Control: Heidenhain 1190 Country of Origin: Germany Year of Manufacture: 1995 The machine is fully equipped with fixed and driven tool holders. Gjdpfsx Dzhbjx Admett Machine specifications: - Turret: 12 VDI-40 tool stations (6 driven stations) - Max spindle speed: 3,600 rpm - C-axis - Driven tools - Hydraulic tailstock - Max turning diameter (X-axis): 500 mm - Max turning length (Z-axis): 1,000 mm - Coolant system - 250 mm 3-jaw hydraulic chuck - Chip conveyor - Complete programming manual - Mechanical and Electrical Documentation - Machine weight: 7 tons - Price includes loading The machine has undergone a comprehensive inspection. 100% operational. Connected and ready for work. Stal-Com has specialized in the sale, service and training on DMG Group CNC machines for 19 years. We focus on all models of Gildemeister lathes and Deckel Maho machining centers. Every machine undergoes a meticulous technical check. In addition to Polish clients, our machines are purchased by customers throughout Europe and some parts of Asia as well. Each machine can be tested in production, as we also offer contract machining services. After purchase, we provide operator training and can set up part production at the customer’s facility. We have established ongoing cooperation with numerous companies to whom we regularly supply further metalworking machines.

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; Gtsdpfjrfx Tnsx Admet X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Year of construction: 2001, operating hours: 74,900 h, functionality: fully functional, machine/vehicle number: 01180001301, turning length: 1,100 mm, turning diameter over cross slide: 600 mm, turning diameter: 600 mm, spindle motor power: 23,000 W, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 320 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,097 mm, rotational speed (max.): 3,600 rpm, bar passage: 72 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, total height: 2,130 mm, total length: 5,560 mm, total width: 2,400 mm, overall weight: 8,700 kg, controller manufacturer: Heidenhain, controller model: CNC Pilot 3190, nominal power (apparent): 58 kVA, workpiece diameter (max.): 600 mm, Equipment: documentation/manual, Main spindle – tailstock – steady rest Part catcher with conveyor belt Spindle reduction, diameter 12–70 mm 200L coolant tank 20 soft jaws, 1 hard jaw, 2 gripper jaws 12 tool stations – 6 of them powered 3x axially driven tool EWS Gjdpfx Aexugrmsdmett 3x radially driven tool EWS Operating hours 74,900 – Spindle hours not displayed Travel X 320 mm Y+/- 50 mm Z 1,097 mm Distance between centers 1,285 mm Extraction unit Control: Heidenhain CNC Pilot 3190 – Software V5.3 Max. speed of driven tool: 4,000 rpm 6x revolving centers Tool measuring system – Marposs

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Godpfx Aen Ut Iledmjtt This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Godpfewrfamox Admott

Condition: reconditioned (used), Year of construction: 2017, operating hours: 6,900 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Max. Workpiec dimesion 1200 x 850 x 450mm Workpiece wight max. 1600 Kg Travel X 600 mm Y 400 mm Gtsdpfsv Ai Ukex Admet Z 450 mm C 360 ° Year 2017 Toolchanger 16 Elektrodes RTC

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Gsdjw Ucyujpfx Admjtt Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.