Cnc turning and milling center

Gildemeister CTX 510 +bar feed Iemca 880 C axis

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fedpfxour Hfzj Afnopc Fanuc 310is controller

Year of construction: 2022, condition: ready for operation (used), A CNC double-spindle turning machine DMG Mori is available. Turning length: 800mm, power: 25kW/32kW, torque: 280Nm/360Nm, speed: 5000rpm, Y-axis: +/-100mm, B-axis: +/-110°, tool stations: 80, max. chuck diameter: 210mm, tool interface: HSK-A63, drawtube inner diameter: 67mm, control: Siemens 840D sl, operating hours: approx. 4786h, program hours: approx. 1937h. Including short bar loader IRCO ILS-MUK 100/16, oil mist separator and scraper chip conveyor. Documentation available. On-site inspection is possible. Fjdsx H S I Topfx Afnjpc

Condition: good (used), Year of construction: 2019, CNC Turning and Milling Center Machine type: Spinner TC 800 - 85 MCY Control: Siemens 840 D Shopturn Year of manufacture: 2019 Available from: immediately TECHNICAL DATA: Max. turning length: 900 mm Turning diameter: 500 mm Spindle speed range: 2,600 – 4,000 rpm C-axis Bar capacity: 85 mm Tailstock Travel: X-axis: 360 mm Y-axis: -55 / +65 +/- mm Z-axis: 900 mm Number of turrets: 1 Tool stations: 12 Driven tools: 12 Fedpfx Asxdc Sujfnjpc Tool holder: BMT 65 Equipment: Chip conveyor Electronic handwheel

Condition: good (used), Robot Fsdpfobrhtdox Afnopc Manfacturer: Staeubli Type: RX170

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min Fpsdpfx Asww Nazofnec drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Fsdpfevrxd Hex Afnspc Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Fsdpfju Rnluox Afnepc Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Fpodjrgahxepfx Afnec

Condition: used, Year of construction: 2017, x-travel 3600 mm y-travel 1100 mm z-travel 900 mm weight of the machine ca. 30450 kg Fpodpfx Aex H Twvjfnoc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Fpodpfjxz E N Dox Afnjc