Wire EDM machine

GF AgieCharmilles CUT 400

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of manufacture 2013 Control system: HMI 1 Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Including option for large wire reel of 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is kept in our warehouse and will be cleaned, overhauled, and tested for all functions upon receipt of the order. Optional: - Commissioning of the machine at your premises - On-site training Pgsdpfxswmmvls Ad Nog - Cooling unit - Transport - Clamping bar set

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol Pgsdpfx Adoxcp Slj Njg - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Very well-maintained condition.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission. Pgedpow Ucyuofx Ad Njg

Condition: used, functionality: fully functional, power: 27 kW (36.71 HP), total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2013, operating hours: 577 h, input frequency: 50 Hz, shaft diameter: 105 mm, feed length X-axis: 265 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, The PBT25 with automatic radius measurement—the absolute all-rounder in our product range. This powerful and precise bending machine impresses with maximum flexibility and ergonomics. The infinitely adjustable front roller spacing from 200 mm allows for the smallest radii with perfect transitions. Thanks to the PC300 software, re-bending becomes effortless. Three powerful, low-noise electric motors drive the rollers at up to 22 rpm, ensuring the highest precision. Standard roller supports on all three shafts provide optimal stability. For more information, visit the official PBT AG website. Pgedpfxowm N Epo Ad Neg

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement Podpfx Aewglfxod Njgg

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Pgjdpfx Ajvvxvdjd Njg Consists of 1 measuring case 50-100mm

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, overhauled, delivery time by end of January 2026, 12-month warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Loading rails for charging the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric damper can be retrofitted upon request - Charging trolley available on request (see photo) - Documentation, CE declaration Psdpevk Navofx Ad Njgg We are happy to offer installation and commissioning as an additional service. Inspection by appointment in our warehouse. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, pre-heating oven, tempering oven, drying cabinet, chamber kiln, curing oven, recirculating drying cabinet, recirculating oven

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control total power requirement 15 kW weight of the machine ca. 3,5 t Pedpfx Adougawfj Negg dimensions of the machine ca. m

Condition: good (used), Drying oven for uv line Pgedjt Ag Uqspfx Ad Nsg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Pgsdol Dw D Ejpfx Ad Nog At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg