Gemsa Gemrok 45 drilling rig. WATCH VIDEO.

Gemsa Gemrok 45 drilling rig. WATCH VIDEO.

Condition: used, Year of construction: 2004, Field of application: Construction Serial number: 04085xxxx Please contact ATS Norway for more information Please provide reference number upon request: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (Hour counter has stopped) Chassis: See pictures Bdjdpfx Abjvg Nt Iobsk Belt width: Approx. 40 cm Equipped with winch Includes Dynaset generator Services: Performed both by the owner himself and at the workshop Remote control Ready for delivery M l: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tons Description: The hour meter has stopped, but the owner estimates that the machine has run approx. 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since the change. Drills 193 mm holes and the included equipment includes a drill bit and 120 meters of rods for immediate use. The machine is equipped with a 4-cylinder Deutz engine that only has 500 hours on it after engine replacement. It is ready for delivery and ready for work. Please contact us for more information or a viewing! Hours: 10000 Own weight: 12600 Model: 55S

Condition: used, functionality: fully functional, fuel type: diesel, color: red, overall weight: 5,000 kg, Year of construction: 2019, We are selling our Bohak well drilling machine. The machine was only used for private drilling and has therefore only had a few working hours since its purchase in 2022. The detailed description can be found on the last page of the pictures, as it is very comprehensive. The drill rods include 33 rods of 3 meters each. The drill heads are listed in the description on the last picture. Everything you need for drilling is included, so you can get started right away. The machine is functional and can be inspected on site. Detailed instructions and circuit diagrams are available upon request. Additional pictures are also available upon request. Bdjdpfx Aov I S Epjbbsk We purchased the machine used and overhauled directly from the manufacturer in 2022. The original invoice is available for inspection. The price is net, VAT is not included. The machine is located in Worms-Rheindürkheim. Please feel free to inquire by phone. Warranty and guarantee excluded

Condition: used, mileage: 1 km, power: 129 kW (175.39 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2003, Equipment: all wheel drive, GVW: 48.000 kg Please contact Emal Jaweed for more information Bodpsuqbr Tefx Abbedk

Condition: ready for operation (used), Year of construction: 2021, A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible. Bedpfx Aoxu I A Tebbodk

Condition: used, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, overall weight: 11,800 kg, fuel type: diesel, color: green, axle configuration: 4x4, operation weight: 18,200 kg, maximum load weight: 2,300 kg, empty load weight: 9,500 kg, tire size: 9r22,5, brakes: retarder, driver cabin: day cab, gearing type: mechanical, suspension: steel, machine/vehicle number: 697, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Bsdpfxoqx Szno Abbsdk

Condition: used, functionality: fully functional, machine/vehicle number: D08E/8404, Offer Number: D08E/8404 Machinetype: straightening and cutting machine Info: overhauled Make: WAFIOS Type: R5 Constr. year: diameter range: 6-14 mm cutting length: 6000 mm speed - meters/min: 23 - 90 Bdodpexnykcofx Abbsk Location: Europe

Condition: used, Year of construction: 1967, functionality: fully functional, machine/vehicle number: D08L/8408, Offer Number: D08L/8408 Machinetype: straightening and cutting machine Make: WAFIOS Type: R3 Constr. year: 1967 diameter range: 1,5-7 mm Bedowzktqepfx Abbodk cutting length: 2000 mm speed - meters/min: 90 Location: In our warehouse

Condition: good (used), Year of construction: 1995, Screw compressor Bdodpfjvi Hpljx Abbek Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Operating hours: approx. 12,865 h Delivery pressure: 20 bar Output: 224 kW Engine: OM441LA Weight: 5.8 tons

Condition: used, New: No Field of application: Construction Serial number: A00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20517 Specifications: - Unknown model year Bdedswph D Aepfx Abbsk - 5224 engine hours - 3049 hammer hours - Machine width: 225 cm - Vacuum cleaner - Rod holder - Winch - Pendulum on undercarriage - Undercarriage (see pictures) - Lights - Ready for delivery Description: We have a Tamrock DHA 400S drilling rig for sale. The drilling rig starts and runs, but there is something wrong with the engine. The cause is unknown. Apart from this, everything should work as it should according to the owner. Services have been taken by the owner himself continuously. Some additional costs must be expected. Ready for delivery. Own weight: Width: 255 Hammer hours: 3049 Engine hours: 5224 Model: DHA 400 S

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Bodpfexld Awjx Abbjdk