LC 16 EC

GEIGER

Condition: ready for operation (used), Description: Geiger MiniServo II 1.5, a servo-motorized removal device or sprue picker, specifically designed for use with injection molding machines. The device is used to precisely and quickly remove sprues or small finished parts from the mold and place them in a designated area. Nedpfx Akezpzhre Uowi Swivel axis (A): 0-105° Removal stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive for the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for the gripper 1 compressed air circuit for the rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard removal sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable, 5 m Placement area behind and in front of the machine RAL 9016 white Additional control unit HT7, vacuum circuit, and consoles Input voltage: 230 V Since I was unable to observe the device in operation, I cannot provide any guarantee. According to maintenance records, it is in good condition, but it has experienced occasional malfunctions (1 to 2 times per week). Turning the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit for this reason.

Condition: excellent (used), Year of construction: 2004, Engel Nedpfx Aoh Rawbek Uswi Victory 80/45 Tech Closing force: 45 tons, without core Screw diameter: 22 mm Year of manufacture: 2004 Control unit: 200

Condition: good (used), Year of construction: 2013, 1x Geiger Midi Liner 15.0 S Nwodpfx Aszmw E Ujk Uei Year of manufacture: 2013

Condition: good (used), Year of construction: 2011, 1x Geiger MidiLiner 15 Nodpfx Aezmw Ezek Uowi Year of manufacture: 2011

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm Nwjdpfx Ajrp Dyrek Usi distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2019, 1x Geiger MidiLiner 15.0S Nwodpfxjzmw A Ts Ak Uoi Year of manufacture: 2019

Condition: used, Year of construction: 2013, overall weight: 300 kg, load capacity: 3 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Nwjdjzi E Tlopfx Ak Usi

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Nwedpsw Rqwtefx Ak Uoi

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Nsdszinxqjpfx Ak Uswi Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: good (used), Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck Nwjdpeb Ix Niofx Ak Uei -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 18000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function Njdpfx Ajy D Ilcjk Uowi • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,900 mm, control cabinet width: 76 mm, control cabinet length: 46 mm, control cabinet height: 92 mm, Geiger MotionLiner 10.0 XD Stock number: 503651 Machine type/ Device type: Handling Manufacturer: Geiger Type: MotionLiner 10.0 XD Year of manufacture: 2020 Nedpfx Akezhkn Ej Ujwi Handling weight: 10 kg Stroke X-axis: 600 mm Stroke Y-axis: 1200 mm Stroke Z-axis: 1900 mm Console dimensions: 115cm x 20cm x 76cm Control cabinet dimensions: 76cm x 46cm x 92cm Interface: EUR 67 Accessories: EASYTouch HT320Z

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Njdpsxk Ty Nofx Ak Uswi

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Njdpfjrgw Exsx Ak Uewi Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: new, Year of construction: 2021, All information is in the attached files. Nwodpfxspcf D So Ak Uoi