Screw compressor

GARDNER DENVER KSA18

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 Fpjdpomiik Tefx Ahlek 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Fpedpfx Ahov Rmmmolsk

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm Fpsdoxlcufopfx Ahlek 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Fedopqxnxspfx Ahlspk

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: Fpodpfxowlp Hdj Ahljk On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Fsdpfx Ahexdbubelspk Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KAESER ASK27 screw compressor, machine after service Technical data: Capacity: 2.40 m³/min (2400/min); Motor power: 15 kW; Pressure: 11 bar Operating hours: 5587 h Year: 2008 Net price: 12,500 Gross price: 15,375 Fsdpeylmizofx Ahlopk The compressor is fully operational. Service support is provided. Below is a video demonstrating the machine's operation.

Condition: used, MANUFACTURER: ATLASCOPCO MODEL: GA22 FF Fedjyizp Djpfx Ahljpk SERIAL NO.: AII239418 YEAR: 1998 POWER (kW): 22 CAPACITY (m3/min): 3.22 PRESSURE (bar): 7.5

Condition: used, Technical specifications: Max. planing width: 240 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: bottom right left top bottom Each spindle driven by a separate motor Number of upper steel feed rollers: 4 Number of upper rubber feed rollers: 2 Extraction port diameter: 150 mm Infinitely variable feed speed control Feed through cardan shafts Lubrication pump for the work table Pressure: 6 atm Electric lifting of machine body Power supply: 380 V Total power: 31 kW Fedpfx Aev Hzh Dehlopk Overall dimensions: Length: 4000 mm Width: 1740 mm Height: 1730 mm

Condition: good (used), Manufacturer: KAESRER Year of manufacture: 1999 Type: AIRTOWER 11 Item number: 1.8833.10020 Serial number: 1010 Operating hours: 5,766 h Pressure: 7.5 bar Delivery volume: 975 l/min Motor speed: 3,000 rpm Connection: 7.5 kW Dryer: TU 11 Refrigerant: R 134a Fpedpfx Aswhwx Hshlsk Pressure: 16 bar Condition: Good Weight: 270 kg Dimensions: 680 x 780 x 1,300 mm