Hot runner unit - PRICE REDUCTION!

Günther DP15/10

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Hodpfxjuk I Etj Abkenu

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Drive roller: knurled Idler roller: crowned, over-rotated PVC conveyor belt Hsdpfeg D T N Hex Abkjnu Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Hedjd Tidxspfx Abkenu Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/accumulation conveyor Angle-adjustable conveyor belt with hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Hodpfeh Nyp Uox Abkonu Belt speed 3 m/min Mobile on steerable stop rollers Optional: other dimensions, see standard delivery list dimensions according to customer requirements FDA-compliant belt modified belt speed etc.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: D32L/7787, Offer Number: D32L/7787 Machinetype: spring coiling machine Make: WAFIOS Type: FS41 Constr. year: 1995 wire diameter: 0,8-4,0 mm spring diameter: 70 mm feeding length: 1500 mm output pieces/min: 200 Hnedpfx Ajwi S E Robksu Location: In our warehouse

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Hedjxq Hckepfx Abksnu Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: excellent (used), Year of construction: 2004, Dryer Wittmann Hedpfx Aeumnknebkenu Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Hodpfx Absu Ti Tvsksnu Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: used, Year of construction: 2018, machine/vehicle number: 180635, input voltage: 400 V, total height: 1,470 mm, total width: 480 mm, total length: 1,210 mm, power: 4 kW (5.44 HP), funnel diameter: 310 mm, For sale is a high-quality granulator from Wanner Technik, model C17.31sv. Manufactured in 2018, this is a modern, well-maintained unit that is ready for immediate use. Manufacturer: Wanner Technik GmbH Model: C17.31sv Serial number: 180 635 Year: 07/2018 Power: 4.0 kW Voltage: 400 V Frequency: 50 Hz Current: 8.4 A Transport and loading can be organised Europe-wide upon request and for an additional fee. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Hjdey Hklkepfx Abkjnu Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, displacement volume: 1,657 cm³, mold height (min.): 300 mm, ejector stroke: 250 mm, Equipment: documentation/manual, Machine in very good shape. Hopper drier, hopper loader and 3 axis robot included in the price. Price can drop if the machine is purchased without them. Still in production and available for inspection. Hsdpfjwf Upwox Abkenu Price loaded on truck.