Stacker

Gämmerler KL 540 LPC

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Lodpfoh Nrh Usx Aa Ejhr Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Lhedpfxsfc A Urj Aa Ejr Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, Lhodpfxev Ifxis Aa Eer 24 longitudinal feeds, Metric thread, Inch thread,

Condition: used, Year of construction: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 - RFH, manufactured in 2007, is a high-quality folding machine with a size of 820 mm. Currently dismantled and located in Germany, this machine features a rotary feeder RFH-82. It includes three stations: the first station has 6 folding pockets of 82 cm with automatic pocket setting, the second station has 4 folding pockets of 66 cm with automatic pocket setting, and the third station has 2 folding pockets of 56 cm with automatic pocket setting. The machine also includes a stacking delivery SBP 66, a touchscreen monitor, and an MCT control system. The specific model is identified as TH82/6/4/2 with the machine number O-00951. Format: 820 mm Equipment: Rotary feeder RFH-82 Lhjdpownft Sofx Aa Eer 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Lhodpowrybrefx Aa Eor Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device Lsdpfemn Sk Nox Aa Eehr · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Lsdjg Du Auspfx Aa Eohr Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Mechanical speed: 25,000 Ex./h Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS Lhsdpec Icm Rsfx Aa Esr • 4 MTD-AWS-OWK • built in 2005 JET Feeder • 8 JEF-450-FVM-SA190 • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Lodpsdrhpfsfx Aa Eehr Equipment • - special: post code identification

Condition: like new (used), Year of construction: 2019, GIC TAGINNOV SPEED ETIQ Year of Manufacture: 2019 _____ Product Description: Lhjdpfjv Iqg Sex Aa Ejr A GIC RFID processing machine where the RFID is dispensed under the label where you want it. Machine Specifications and Equipment:  Speed: 3 to 50 m/min.  Weight: 70 to 16gr  Label Width: 350mm Maximum  RFID: wet  RFID width : 100mm maximum _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____