B2 sheet-fed inkjet press

Fujifilm Jet Press 750S

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Ljdpfx Ahsxz Ewnebehg

Condition: new, functionality: fully functional, Year of construction: 2024, The Rotection flow packaging machine is suitable for packaging various products. A big operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Operating display: 10" touchscreen, can be swiveled using the extension arm for comfortable operator handling Drives: Servo Packing length: 900-450mm Lhedpfjq Ikhhsx Ahbsg Packaging width: 35-200 mm (depending on film width) Packing height: 5-80 mm (depending on forming shoulder) Speed: 30-100 bags/min. in continuous operation Speed: up to 60 bags/min. Intermittently Film width: 90-400 mm Consumption: approx. 8 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 800 kg System dimensions: approx. 4370 x 1020 x 1550 mm (LxWxH) Error rate: < 5% Print mark sensor: Yes Winding shaft: fixation of the roll by hand without compressed air including roll stop for precise application Roller mount and guide: Overhead Printer holder: possible for an extra charge We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Condition: ready for operation (used), -----Konica Minolta Accurio Press C 6100, only 873,524 copies! ----- Tested and ready to work! Equipment: - PF 711 - IC 604 - RU 518 - FS 532 - SD 510 Available as options: IQ 501 + VI 511 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet shipping, ensuring our customers receive machines in perfect condition. We ship copiers sourced from and maintained by Konica Minolta France. If you have any questions, feel free to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Lodpfx Aoyx Ux Eehbohg Please do not hesitate to contact us for further information.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks Ledpfx Ahowh Tq Sjbjhg • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million Lsdpjvmfxgofx Ahbshg

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video Ledjh Axd Nspfx Ahbshg We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2001, condition: excellent (used), Single screw extruder WEBER NE5 1-30:D Lsdpfx Ajhy Tp Dohbohg with 2 co-extr. WEBER ZE30 Year of construction 2001 Screw diameter 50 mm Application:PE-PP, Three-layer pipes or pipes with colored stripes The plant has manufactured heating pipes Condition: very good 2 Co-Extruders WEBER ZE30 Screw diameter 30mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany

Condition: excellent (used), Like brand new machine for soft and hard cover books! Both PUR and EVA capability! Production speed: 1–3 books per minute Min/max binding thickness: 0.1–45 mm Max. binding length Up to 455 mm Min/Max. binding heigh: 140 mm / 320 mm Max soft cover thickness: Up to 400 g/m2 Voltage (V) / Frequency (Hz) 220–240 / 50–60 Max. current: 3.8 A Ljdpfx Ahevnzx Eebohg Machine dimensions (W x L x H): 107 x 60 x 64 cm Weight: 90 kg Standard tools Hard & Soft cover tool set Casemaker available also

Condition: good (used), Fastbind PUREVA XT Perfect binder Machine ready to work, after inspection. Possibility of gluing hard and soft covers and blocks. Two replaceable gluers for gluing with standard EVA (Hot melt) and PUR (Polyurethane Glue) glue The machine is equipped with the new PGO Microcut milling technology. Ideal for photo books, thick covers and to meet the requirements of difficult customers. original product – Made in Finland Lodjvkt Rxopfx Ahbshg The set includes strips for hard and soft covers, Description: Technical capabilities of the machine: 60-180 books/h Min. / max. cover thickness 0.1–45 mm Max. length of glued spine 455 mm Max. cover thickness 400 g/m² Voltage 220–240 V Machine dimensions (width/length/height) 1070 x 600 x 640 mm Weight 90 kg

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Lhedpfx Aekw Ufzshbog Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor