FORMAT4 Profit 2S

FORMAT4 Profit 2S

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Ksdpfx Agjxl Ha So Ujdg Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps Ksdpfx Ash U Damog Uedg pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Ksdovvi Htopfx Ag Usdg Keyboard: Yes Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: used, Holz Her Sprint 1317-1 FÜ + PU heavy-duty design – edge thickness 0.4 – 5 mm SPS screen control large LCD display pre-milling unit before gluing area Ksdpfxjx It Hme Ag Usdg fully automatic edge magazine for coil and strip material glue application station for cartridges + PU gluing maximum edge height 51 mm automatic glue height adjustment press unit 1913, motorized pneumatic trimming unit for coils and strips with pneumatic adjustment for miter saw angle from 0–10° multifunctional milling unit 1942 MOT 2 milling unit with motorized adjustment axes for various radii – chamfering – flush milling via SPS copy milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm scraping unit for chamfers and radii pneumatic infeed and outfeed finish – surface scraper regular maintenance by Holz Her machine is FACTORY SERVICED, in EXCELLENT CONDITION available from stock in Lieboch

Condition: excellent (used), Year of construction: 2007, Machine Data: Holzma HPP 380/43/43 Kdedsx Sd Sujpfx Ag Ueg Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: good (used), Year of construction: 2013, functionality: fully functional, overall weight: 750 kg, volume flow: 6,000 m³/h, input voltage: 400 V, power: 9.2 kW (12.51 HP), Clean Air Extraction Unit Felder RL-300 Year: 2013 The unit comes from a training workshop and has seen little use in recent years. Maintenance by Felder / regular maintenance of extinguishing system performed. Documentation, manual, and ATEX compliance documents available. Additional equipment: - Automatic extinguishing system (powder extinguisher) - Silencer Technical specifications: - Extraction capacity approx. 6,000 m³/h Kdsdpfx Agox H Tyqo Ueg - Maximum negative pressure 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 litres - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Steel impeller - Motor power: 9.2 kW Weight: 750 kg Matching ductwork for ceiling installation (NW160-300) with transition pieces and pneumatically operated shut-off dampers available on request. All information provided without guarantee. Errors excepted. All dimensions are approximate. Offer is subject to change without notice. The machine can be inspected by appointment. Prices, specifications, and details subject to change. Prior sale reserved! All prices are net plus VAT. Payment in advance within 14 days from contract conclusion, including any applicable freight charges. In the event of incomplete payment within the specified period, the seller reserves the right to cancel the purchase agreement. Sale is made exclusively to entrepreneurs according to § 14 BGB. The machine is sold with exclusion of liability for material defects. This exclusion does not apply to claims for damages due to material defects resulting from grossly negligent or intentional breach of duty by the seller or its agents, as well as for injury to life, body, or health. Any existing claims against third parties for material defects are assigned to the buyer. Please note that I cannot accept liability for compliance with any safety regulations that may apply at your location regarding the machine and its components. Compliance with safety regulations is the responsibility of the end user. All contracts concluded by me are subject exclusively to the law of the Federal Republic of Germany, excluding the UN Sales Convention. Place of jurisdiction is Mannheim.

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump Kodpfx Aexqf Dysg Usdg incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026. Kdsdpfxsxfvp As Ag Usg

Condition: ready for operation (used), Year of construction: 2002, This HEBROCK AKV 3003 DK-F was manufactured in 2002. A robust edgebander with a total power of 10.5 kW, operating on 230/400 V and 50 Hz. Ideal for efficient edgebanding operations. Contact us for more information about this machine. Kedpfx Aex E Eayog Uodg Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2011, number of axes: 3, Main Drive Number of axis 3 Kdsdpfx Ajx D D Ttog Usg This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information. Application Types CNC Wood Machining