ATEX Ventilators

Fluma Clima ATEX Special Ventilation System

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Djdpfx Ajw Hz T Eea Hecl

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. Dcjdpfxotndpzs Aa Hol depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Schubert TLM-F2 / F44 Packaging system for bottles and folding boxes in cartons with subsequent palletising. Fully automised packing system. Dcjdpek Ttykofx Aa Hjl Pick a bottle and place in box. Place a box on pallet. Acceptance of bottles and folding boxes - Pre-grouping of bottles or folding boxes - Erecting cartons from flat blanks using hot glue - Filling the pre-grouped products into the erected boxes - Closing the filled boxes with hot glue - Weighing and labeling of the sealed boxes - Palletizing the boxes

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau Dcedpfx Ajwqp Npsa Hol TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Dodpfx Ajtv Rm Soa Hecl Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): Djdpfxsw U El Te Aa Hjcl - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Dodpfxeymaz He Aa Hecl Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: excellent (used), Becomix Universal Homogenising Mixer Model RW3000, Capacity 3000 lts, Complete with piping and control panel. Universal mixer for various cosmetic and pharmaceutical products Application: Low to very high viscosities - For example, creams, ointments, emulsions, toothpastes, gel products, mascara, make-up. Dcjdpfx Asx Dnilea Hsl Properties: Homogeniser with internal and external circulation, Anchor agitator with scrapers for horizontal and vertical mixing Short heating and cooling times, Hygienic and dead space-free construction, CIP/SIP, ATEX zone 2 to 0 possible, cGMP

Condition: like new (used), pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 125 l, Homogenizer Mixer CML125 Key Data: • SYMEX CML125 Dsdpfx Aaeyf N H Aj Hecl • Working volume: 125 L • Anchor agitator with scrapers and flow breaker 19 ... 82 rpm • Homogenizer with reversible operation (homogenizing/pumping mode) 5 - 21 m/s • Circulation line • CIP (Cleaning in Place) • Lid hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but also suitable for cosmetics Media Supply: • Cooling water supply: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3 m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Power supply: 3x400V at 50Hz; 45.0 kVA / 45.0 kW • Steam: 6-8 bar, 45 kg/h The machine is factory-refurbished and can be inspected. We provide full “turnkey” project management, including on-site installation and commissioning at your facility.

Condition: excellent (used), Becomix Stirring & Mixing Tank Electric lift lid Dsdpex Dnkijfx Aa Hscl Scraper and mixer motors 316 stainless steel 3000 lts capacity