Piling drill

FAMUP RAG 35

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Ncodjf Ey Auepfx Amnjt Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Nsdpfsr Hcmrox Amnoct Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable Nodpsvncfmefx Amnoct - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. Ncodpsudi Unsfx Amnst The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling Ncsdpfjp Scqysx Amnet

Condition: new, Year of construction: 2019, Balancing Machine Haimer TD 2009 Condition: As new (unused) Machine weight: approx. 350 kg Terminal weight: 50 kg Spindle speed: 300 – 1100 rpm Measurement accuracy: < 0.5 gmm Smallest measurable unbalance: 0.5 gmm Pneumatics, required operating pressure: 0.5-0.6 MPa, 5-6 bar Air consumption: 30 l/h Operating voltage: 230 V Frequency: 50-60 Hz Total connection current, protected on site: 1 x 16 A Residual current circuit breaker: Type B Ncedpfx Amoxz R Urjnst Power consumption: max. 1.0 kVA Current consumption: max. 7.5 A Noise emission: < 70 dB Protection class: IP 50 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Ncsdju Nu R Ijpfx Amnet Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: used, Technical details: Njdeu Nwdkopfx Amnoct power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 58 kg dimensions of machine: 0,6 x 0,35 x 0,5 m Welding rectifier/inverter with trolley MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 Without hosepackage and welding gun! *

Condition: used, spindle taper 750 W // 400 V // 50 Hz Ncjdst Rmbyopfx Amnet Boring power 25 mm connected load MK 2

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 300 mm bore stroke 160 mm threading M 30 turning speeds 100 - 1600 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Machine height 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "A" pos. 24. (Coolant base plate, complete) Njdpfexabq Ijx Amnoct - digital drilling depth display pos. 37.1 (5-digit LED display)