Eyeletting machine

Eyeletting machine for advertising banners

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. Laedsh Eibaepfx Aa Eek CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 1985, Cutting width: 760 mm Lasdpsxyf Svjfx Aa Eek Insertion depth: 760 m Working height (cutting height): 110 mm Table height: approx. 900 mm Machine dimensions (W×D×H): approx. 1,520 × 1,750 × 1,400 mm Pressure: 150–2,500 daN (infinitely adjustable) Machine weight: approx. 1,040 kg short-term available

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 • YEAR : 2000 • WORK : 46.516 Hours Ljdpfx Aajvm Ab Ej Eeak DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: new, Year of construction: 2024, Guowei 52 - available immediately on stock in Europe Cutting width CM 52 Max.cutting height without assistance pressing plate CM 7.5 Max.cutting depth CM 52 Min cutting depth without assistance pressing plate CM 2 Extended length of working table CM 47.5 Height of working table CM 87-90 Machine width including side working table CM 79 Total length of working table CM 120 Cutting speed R/MIN 15 Manx. Paper pressure N 7000 Power of main motor KW 2.2 Motor for paper feeding KW 0.2 Laedju Nxd Sepfx Aa Ejk Machine weight KG 370 Overall dimension CM 137*92*146

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laedpfxodkp D Hs Aa Ejk Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Year of construction: 1996, condition: used, Co-pilot, starfeeder, rounding & backing, gluing, gauzing, book mark suction device, gluing, head & tail banding, pressing, casing-in, case prestacking, case bending, case forming, Kolbus FE 603, Kolbus DS 391 Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Hard cover book line Kolbus BF 525 + FE 603 Year: 1996 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Laedpjvw Al Eofx Aa Esk Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min -: - Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), HSS saw grinder LOROCH model Ekostar 760 year 2008 Lajdpfsw Hrvqex Aa Ejk

Condition: excellent (used), Year of construction: 2021, Casing-In Machine - photo book block splitter - Hotmelt nozzle gluing unit for joint gluing Lajdovr S H Iepfx Aa Ejk - Nordson premelter - Code-Matching - double case control - special equipment for the processing of flexible cases

Condition: new, The SBS 1270/2 is a compact and robust folding machine from KNUTH, designed for versatility in the Folding Machines category and specifically within Manual Folding Machines. Ideal for bending thin sheets, its small footprint makes it suitable for limited workshop spaces while its segmented upper tool provides a wide array of bending possibilities. The SBS 1270/2 features an adjustable angle stop with a scale up to 135°, ensuring precise bending for producing small series. Additional specifications include a maximum plate thickness of 2 mm and a working length of 1,270 mm, allowing for efficient operation. It is equipped with a foot switch for hands-free clamping and a cam lock with rebound spring for effective counterbalancing. For those looking to enhance their sheet metal processing capabilities, the SBS 1270/2 offers an excellent solution. For more information, don't hesitate to request a quote today. Laodpfxouy H Ute Aa Eek

Condition: used, Year of construction: 2010, Only for export! Agfa VCF85 violet clean out unit, online version Lsdpfx Aotq R Tija Esak