Tool grinder

EWAG RS 12

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 1289 397, spindle speed (max.): 8,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 50 mm, swivel angle A-axis (min.): -10 °, swivel angle A-axis (max.): 27 °, TECHNICAL DETAILS Motor power: 2.2 kW Spindle speeds: 1,000 - 8,000 rpm Spindle tilt (A-axis): -10° to +27° Adjustment accuracy: 1 minute Height adjustment (Y-axis): 130 mm Stroke range (X-axis): 220 mm Oscillation stroke: steplessly adjustable during oscillation, 0-30 mm Oscillation frequency: 30/60 rpm Nlodpfx Aaewzlh Asaea Workpiece Spindle Head Radius adjustment (Z-axis): 0.01 - 50 mm Adjustment accuracy: 0.01 mm Slide retraction (from grinding to measuring position): max. 49 mm Cross table clamping surface: 155 x 205 mm Travel distances (X-Y): 60 mm each Maximum swivel angle (B-axis): 260° MACHINE DETAILS Connection voltage: 380 V Weight: 1,200 kg EQUIPMENT - Variable grinding pressure - Projector fixed in measuring position - 1 cabinet with accessories - Various grinding wheels and flanges - Coolant tank - Documentation

Condition: used, Year of construction: 2005, Reishauer RZ150 gear grinding machine Nlsdpfx Aajxz E Srjasa

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Nljdpfx Aewqm A Tjaaja Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort!

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm Nodpfx Aajw Intaoajla --> new in 1988

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Nljdpjv A Hhhefx Aaasa Total power requirement 0,25 kw

Condition: like new (used), Year of construction: 2014, operating hours: 925 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,808 mm, total length: 4,447 mm, chuck outer diameter: 210 mm, total width: 2,378 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, 925 spindle hours—in other words, virtually as good as new; that’s certainly the case for this DMG MORI CTX ALPHA 500 V4! The machine comes from a prototype department where primarily plastics were machined. Nlodpey Duinsfx Aaasa

Condition: like new (used), Manual profile grinder UTMA model P20 Nsdpfx Aajff H E Reaela

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm Nsdpfxsw Ty S So Aaaola - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Nsdpfx Aorivluoaajla Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories MARCELS MASCHINEN AG

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC CNC model: 16GC Maximum grinding length: 1000 mm Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Weight: 5,200 kg Nlodpoxxmcgjfx Aaasa