Center Lathe

ERNAULT-SOMUA HN 350

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. Guodpfx Asy Sf Azjg Tsh • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: used, Year of construction: 1977, centre height 200 mm centre distance 1.000 mm spindle turning speed range 1600 U/min Gjdpfx Agjyv N Rke Touh spindle bore 42 mm turning length 1600 mm turning diameter over bed 410 mm 230 mm machine weight ab. 1.700 kg dimensions 2000 × 1000 × 1500 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 960 kg, empty load weight: 960 kg, operation weight: 960 kg, maximum load weight: 150 kg, lifting power: 150 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, suspension: steel, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, head guard, hydraulics, rubber tracks, Excavators GT950 Professional GT950 tracked excavator Model GT950 – 960 kg Introducing the compact and highly functional GT950 tracked excavator – the ideal solution for excavation, construction, and installation work in spaces with limited area. Thanks to its own weight of 960 kg and robust construction, the machine offers stability, precision, and comfort, even under challenging terrain conditions. Its small dimensions and a pivoting boom with a turning radius of only 733 mm ensure that the GT950 performs perfectly on narrow plots, in gardens, and on construction sites with limited space. Engine and Reliability The excavator is equipped with a modern Koop 192F engine that meets the Euro 5 standard, which guarantees low fuel consumption and smooth operation. The reversed cylinder on the boom increases durability and safety during intensive use, ensuring long and trouble-free operation of the machine. Maneuverability and Stability on Terrain Thanks to the extendable tracks with a width of 180 mm and a solid undercarriage with a width of 950 mm, the GT950 offers excellent stability and grip on uneven terrain. The compact overall dimensions (2650 mm long, 930 mm wide, and 2200 mm high) allow for free maneuvering, even in tight working environments, and the ground clearance of the platform of 380 mm enables trouble-free operation on difficult ground. Excellent Performance The impressive operational capabilities include a maximum digging depth of up to 1680 mm, a maximum digging reach at ground level of 2430 mm, and a digging height of up to 2490 mm. The dumping height of 1760 mm makes it easy to load material, and the minimum digging radius of 1340 mm ensures precise work in a limited space. The blade with a lifting range of up to 175 mm and a lowering range of up to 325 mm further increases the functionality of the machine. Technical specifications Model GT950 Weight 960 kg Engine Koop 192F Euro 5 Bucket width 420 mm Reversed cylinder on the boom Yes Joystick Yes Swing arm Yes Extendable tracks Yes Max. digging reach at ground level 2430 mm Gedpfx Agszgn Tij Touh Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Minimum turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height of the blade 175 mm Max. penetration depth of the blade 325 mm Overall length 2650 mm Overall height 2200 mm Overall width 930 mm Overall length of the tracks 1100 mm Turning radius of the upper carriage 733 mm Ground clearance of the upper carriage 380 mm Width of the undercarriage 950 mm Width of the track 180 mm Height of the track 320 mm

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Gujdpoxmd Uvjfx Ag Tsh Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm Gedpsunt Iuefx Ag Tsuh spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: new, pressure 100 t stroke 400 mm Gsdpfxsyv N Ngs Ag Tsuh 1010 mm 295 mm Heads 175x115 mm feed down 7,6 mm/sec feed up 13,4 mm/sec total power requirement 4,0 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Gujdpovt Amuofx Ag Tjh Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: used, turning diameter over bed 435 mm turning diameter over slide rest . mm turning length 750 mm - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Gedpfjyqvgmsx Ag Touh If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Gsdpfxjxq Eyue Ag Touh

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Gjdpfjww Iriex Ag Touh Technical details shown on picture.