Lathe - cycle-controlled

EMCO EMCOMAT E300-1500

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm Cpedpfxexauacs Aanet 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Trolley for Stamping Unit

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar Cpsdsiiy E Tjpfx Aanet suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Cjdpjt Hmlqsfx Aanspt Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle Cpsdpfjtzyx Tox Aanst - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: excellent (used), Year of construction: 2014, operating hours: 33,000 h, The automatic sheet metal processing laser system comprises two each of the following: - Bystronic BySprint Fiber 3015 laser cutting machines - Bystronic Fiber 4000 laser sources - Bystronic Bytrans 3015 loading/unloading systems - Donaldson extraction units and one - Bystronic storage system Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting area: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 Watts Max. mild steel: 20 mm Max. stainless steel: 15 mm Max. aluminium: 15 mm Cpjdoun U Rkopfx Aanjt Location: Zweibrücken Professional dismantling is included in the offer. The machine was regularly serviced by a renowned company, and thanks to a ‘24-hour maintenance contract’, it received more comprehensive parts replacements than strictly required.

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height Cpedpfx Aasvvvw Ejnet 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 2000, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Cpjdpfx Aaou Ixwijnot Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine xH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Csdpfewrfamex Aanjpt

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg Cjdpfx Ajv Nxbyeanjpt - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Cpedpsv Iypcofx Aanet Tool magazine for 20 tools, BT 30 4th axis HRT 210 with counter bearing Spiral conveyor Schusta automation with YASKAWA robot