Press brake

EHT EcoPress 125

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm Bdjdey D Ngzepfx Akiei lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW Bedpfov Tpxqex Akiodi -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm Bsdpsxab I Tjfx Akiodi stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg Bdedora Rrhepfx Akisi a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Bsdpfx Ajpbvqvekiodi Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t Bdedpfx Asu Icmhskioi dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Bjdpotzctmjfx Akiodi Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Bjdeqgcqijpfx Akisdi Weight: approx 6300 KG

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm Bdedpfxevxwqfs Akioi distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm Bdedopmt Ttopfx Akioi X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder