EVA - PVB cutting machine

Eastman Eagle C125

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Iodpfxeu Thbxs Ag Dja Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Iedpfx Aera Nyusg Dja Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Year of construction: 2008, operating hours: 40,000 h, condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Ijdpfx Ajkcgf Hsg Dja Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM Isdpfjtuui Dox Ag Dsa consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Iodpfx Aoiy Dtbsg Dea Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Ijdpowd Raijfx Ag Doa Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: Isdpfxet Ea Tfo Ag Doa - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system Iodpfshrumaox Ag Dsa - integral pneumatic protection

Condition: used, Year of construction: 2016, 8 spindle system. Connected loads: 380/400 V, 19 kW. Glass thickness: 3 - 25 mm. The system produces a beautiful glass finish. Condition: in very good condition. Isdpfxev Rbtuo Ag Dsa

Condition: good (used), Year of construction: 2007, Washing height: 1600 mm. Glass thickness: 1 - 4 mm. 4 washing brushes. Open at the top. Connected loads: 3 x 400 V / 50 Hz, 9.2 kW. Total length: 7880 mm. Depth: 1100 mm. Max. Height: 2300 mm. Fan: Iodpovi Nfvefx Ag Doa Length: 1000 mm, Width: 1000 mm, Height: 1600 mm.