Hydraulic press

Dunkes HDSR 75

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Godpfsy Sxkfox Amzobp Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Gjdpfx Aox Ii Hvsmzsbp Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) Gbodottah Ropfx Amzop → Radius extension Pictures show new machine

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Gsdpfxex Sr Dfj Amzebp Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Side bending aid Swiveling bending aid on top Condition: Gbjdsx Iitijpfx Amzop Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1992, machine/vehicle number: 150258, Offer 24348 Technical data: - Infinitely variable pressure capacity 15 t Gbsdpfeut Uiqex Amzsp - Infinitely variable stroke 150 mm - Mandrel bending device up to 6000 mm - Mandrel bending angle 180 ° - Drive 400 V / 4 kW - Space requirement approx. W 1500 x H 1200 x D 1100 / 7500 mm - Weight approx. 1500 kg - Bending capacity - Bending capacity horizontal bending flat bars 120 x 10 mm - Tube bending ( pressing process ) up to approx. 11/2 " - Mandrel bending up to 42 mm - Bending tools - Tube bending tools Horizontal bending - Mandrel bending tools steel approx. 21.3 R 50 ; 26.9 R 57 ; 30 R 67 ; - 33.7 R 72.5 ; 42.4 R 92.5 ; mm - Mandrel bending tools plastic approx. 10 R 60 ; 12 R 65 + 85 ; 17.2 R 100 - 28 R 65 ; 33.7 R 120 ; 36 R 100

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton Gbedpoxnmb Isfx Amzsp

Condition: new, Ostas 4-roll plate bending machine 4R OHS 3070 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Conical bending device Separate control panel Roll length: 3070 mm Top roll diameter: 320 mm Side roll diameter: 240 mm Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) Godpfx Amexrdxfszjbp 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The pictures shown are for reference only.

Condition: new, sheet thickness: 6bending length: 3100upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Gbedpfed Ab Sdox Amzep - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 7.070,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 Gsdpoyym Tdsfx Amzebp - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum