Refrigerant compressor

Dorin CD1500M/OP (Overhauled)

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Njdpfjxgdlnex Aaaola Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm Nodjguztgspfx Aaasla -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Njdsdkdi Tspfx Aaajla Pressure: 1,6 MPa

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW Nedpfxsx Ap Hpo Aaajla -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Njdpfx Aaoqabiaoaola Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit ! Njdpfeibwarex Aaaola

Year of construction: 2018, condition: used, Ice Machine Make: Ice Systems (UK) Model: F2AS Built 2018 Produces Flake Ice Capacity: Rated at 2 ton per 24hrs Nlodpfx Aewp R Rloaaja With stand, in cabinet Touch screen controls

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Njdpjtr Iw Hofx Aaajla Empty weight: 2.150 kg Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Nsdetqcqaepfx Aaasla Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. Nedpfx Aom Ncaysaaola The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.