Machining center

DMU DMC 60 T

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Godpfx Ajxqd S Noh Hsui Blum Laser Internal coolant 40 bar with paperbelt filter Air true Spindle

Condition: excellent (used), With C-axis With Y-axis With driven tools SIEMENS 840D SL ShopTurn control Turning diameter max 700 mm Turning length -3065 mm Swing Diameter -900 mm Spindle speeds -2'500 rpm C-axis Dividing 0.001° Bar diameter 105mm Top turret tool holders 12 driven positions Y-axis travel 160 mm Tool breakage control system Gjdpfxow S Iq Hj Ah Houi Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2012, operating hours: 22,398 h, Control Unit Brand HEIDENHAIN Model 530 Main Drive Spindle speed range 18000 Number of axis 5 Movement Guedpfx Ajwtivujh Hji X-Axis Movement 400 mm Y-Axis Movement 400 mm Z-Axis Movement 375 mm Tools Slots in storage 30 Type of tool holder HSK63 Additional Equipment 30 tools in magazine This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesn't have internal cooling but has 30 tools in magazine. Application Types Milling

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal Gsdpfowpw E Nox Ah Hjui DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Gusdpowlvi Ejfx Ah Hji control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Year of construction: 2010, condition: ready for operation (used), Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible. Gedpfx Ahsvxvfhs Houi

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel paths X/Y/Z: 500 x 380 x 380 mm Clamping surface 500 x 400 mm Tool magazine for 24 tools, SK 40 Speed 8,000 min-1 Gusdpfxovu Slpj Ah Hsi NC rotary and swivel table Chip conveyor

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Gedpsvtnm Hefx Ah Hsui Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2010, turning length: 800 mm, turning diameter: 430 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 455 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total height: 8,500 mm, total length: 2,500 mm, total width: 2,495 mm, CNC controller: Fanuc FS31IA5 (MAPPS 4) Capacity Turning length mm: 800 Max. turning diameter mm: ø Ø430 Turn-mill spindle X-axis travel mm: 455 Y-axis travel mm: ±105 Z-axis travel mm: 800 B-axis degree: ±120 (0.001º) Speed spindle rpm: 12.000 Drive power kW: 9/5.5 Tool magazine Magazine places: 76 Tool holder: Capto C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret X-axis travel mm: 160 Z-axis travel mm: 730 Number of tool slots St .: 10 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Gedpfx Ahou Afize Hsui Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 7.5/5.5 Chuck type: Solid Chuck (8") Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Coolant gun Working time hours Under power: 76.482 Spindle 1: 14.010 Spindle 2: 4.306 Rated power kVA: 48 Basic machine dimensions / weight 4.170 Length mm: 2.500 Width mm: 2.495 Height mm: 8.500

Condition: good (used), Year of construction: 2004, operating hours: 66,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, table load: 200 kg, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, Equipment: rotational speed infinitely variable, For sale is a CNC milling machine from the brand Deckel Maho, model DMU 50 eVolution. The machine is in good condition and fully operational. History: Guodewvuzzopfx Ah Hoi 2022: Spindle rebalanced, new rotary union and gear ring Geometry newly adjusted Technical data: Year of manufacture: 2004 Control: Sinumerik 840 D Powerline X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Power-on hours: 66,000 h Operating hours: 31,000 h Table dimensions: Ø 500 mm Max. table load: 200 kg Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Rapid traverse X/Y/Z: max. 50 m/min Tool magazine: 60 positions Space requirements: 4,700 x 5,400 x 2,600 mm Weight: approx. 6,500 kg Special equipment: - High-pressure coolant system - Band filter system - Chip conveyor - Automation flap, right side - Digital 3D touch probe - Blum laser measuring system Transport and loading can be organized Europe-wide on request and at an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.